diff --git a/doc/source/deploy_install_guides/release/bare_metal/aio_duplex_install_kubernetes.rst b/doc/source/deploy_install_guides/release/bare_metal/aio_duplex_install_kubernetes.rst
index cab9c6ec5..3e02b1cf9 100644
--- a/doc/source/deploy_install_guides/release/bare_metal/aio_duplex_install_kubernetes.rst
+++ b/doc/source/deploy_install_guides/release/bare_metal/aio_duplex_install_kubernetes.rst
@@ -37,7 +37,7 @@ Overview
 Minimum hardware requirements
 -----------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -114,7 +114,7 @@ Minimum hardware requirements
                shown in the example above, you must reboot the server to fully
                install the apparmor-profile modules.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: begin-min-hw-reqs-dx
@@ -124,7 +124,7 @@ Minimum hardware requirements
 Installation Prerequisites
 --------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -147,7 +147,7 @@ Installation Prerequisites
          Alternately, you can get an older release ISO from `here <https://mirror.starlingx.cengn.ca/mirror/starlingx/release/>`__.
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/installation-prereqs.rest
       :start-after: begin-install-prereqs
@@ -157,7 +157,7 @@ Installation Prerequisites
 Prepare Servers for Installation
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -224,7 +224,7 @@ Prepare Servers for Installation
                virt-manager GUI is not absolutely required and you can safely
                ignore errors and continue.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: start-prepare-servers-common
@@ -234,7 +234,7 @@ Prepare Servers for Installation
 Install Software on Controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -273,7 +273,7 @@ Install Software on Controller-0
          the server to reboot. This can take 5-10 minutes, depending on the
          performance of the host machine.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/inc-install-software-on-controller.rest
       :start-after: incl-install-software-controller-0-aio-start
@@ -298,7 +298,7 @@ Bootstrap system on controller-0
 
 #. Verify and/or configure IP connectivity.
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -321,7 +321,7 @@ Bootstrap system on controller-0
                sudo ip link set up dev enp7s1
                sudo ip route add default via $DEFAULT_OAM_GATEWAY dev enp7s1
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-aio-dx-install-verify-ip-connectivity
@@ -487,7 +487,7 @@ Configure controller-0
 #. Configure the |OAM| interface of controller-0 and specify the
    attached network as "oam".
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -505,7 +505,7 @@ Configure controller-0
                ~(keystone_admin)$ system host-if-modify controller-0 $OAM_IF -c platform
                ~(keystone_admin)$ system interface-network-assign controller-0 $OAM_IF oam
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-config-controller-0-oam-interface-dx
@@ -517,7 +517,7 @@ Configure controller-0
 #. Configure the MGMT interface of controller-0 and specify the attached
    networks of both "mgmt" and "cluster-host".
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -559,7 +559,7 @@ Configure controller-0
                ~(keystone_admin)$ system interface-network-assign controller-0 $MGMT_IF cluster-host
 
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: aio_duplex_install_kubernetes.rst
          :start-after: begin-config-controller-0-mgmt-interface
@@ -570,7 +570,7 @@ Configure controller-0
 
 #. Configure |NTP| servers for network time synchronization:
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -593,7 +593,7 @@ Configure controller-0
 
                 ~(keystone_admin)$ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-config-controller-0-ntp-interface-dx
@@ -640,7 +640,7 @@ Configure controller-0
       on the |AIO| controller platform cores, additional platform cores may be
       required.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -658,7 +658,7 @@ Configure controller-0
                platform in this scenario.
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-add-cores-dx
@@ -697,7 +697,7 @@ Configure controller-0
 
    #. **For OpenStack only:** Configure the system setting for the vSwitch.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -742,7 +742,7 @@ Configure controller-0
                environment OVS-DPDK is not supported, only |OVS| is supported.
                Therefore, simply use the default |OVS| vSwitch here.
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-vswitch-dx
@@ -754,7 +754,7 @@ Configure controller-0
       based nova-local volume group, which is needed for |prefix|-openstack
       nova ephemeral disks.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -775,7 +775,7 @@ Configure controller-0
                   ~(keystone_admin)$ system host-fs-add ${NODE} instances=34
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-add-fs-dx
@@ -793,7 +793,7 @@ Configure controller-0
 
       * Configure the data interfaces for controller-0.
 
-        .. only:: starlingx
+        .. only:: starlingx and html
 
            .. tabs::
 
@@ -840,7 +840,7 @@ Configure controller-0
                     ~(keystone_admin)$ system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-data-interface-dx
@@ -897,7 +897,7 @@ Optionally Configure PCI-SRIOV Interfaces
    * **For Kubernetes Only:** To enable using |SRIOV| network attachments for
      the above interfaces in Kubernetes hosted application containers:
 
-     .. only:: starlingx
+     .. only:: starlingx and html
 
         .. tabs::
 
@@ -915,7 +915,7 @@ Optionally Configure PCI-SRIOV Interfaces
 
                  ~(keystone_admin)$ system host-label-assign controller-0 sriovdp=enabled
 
-     .. only:: partner
+     .. only:: partner and (html or latex)
 
         .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-k8s-sriov-dx
@@ -1053,7 +1053,7 @@ Install software on controller-1 node
 
 #. Power on the controller-1 server.
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -1079,7 +1079,7 @@ Install software on controller-1 node
 
                $ virsh console duplex-controller-1
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-power-on-controller-1-server-dx
@@ -1130,7 +1130,7 @@ Configure controller-1
 #. Configure the |OAM| interface of controller-1 and specify the attached
    network of "oam".
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -1152,7 +1152,7 @@ Configure controller-1
    To configure a |VLAN| or aggregated ethernet interface, see
    |node-interfaces-index|.
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-config-controller-1-server-oam-dx
@@ -1209,7 +1209,7 @@ Configure controller-1
    #. **For OpenStack only:** Due to the additional openstack services running
       on the |AIO| controller platform cores, additional cores may be required.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -1225,7 +1225,7 @@ Configure controller-1
                and 2 for |VMs|; there are not additional cores available
                for platform in this scenario.
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-increase-cores-controller-1-dx
@@ -1263,7 +1263,7 @@ Configure controller-1
 
    #. **For OpenStack only:** Configure the host settings for the vSwitch.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -1278,7 +1278,7 @@ Configure controller-1
                No additional configuration is required for the OVS vswitch in
                virtual environment.
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-vswitch-controller-1-dx
@@ -1289,7 +1289,7 @@ Configure controller-1
       based nova-local volume group, which is needed for |prefix|-openstack
       nova ephemeral disks.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -1309,7 +1309,7 @@ Configure controller-1
                   ~(keystone_admin)$ export NODE=controller-1
                   ~(keystone_admin)$ system host-fs-add ${NODE} instances=34
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-fs-controller-1-dx
@@ -1327,7 +1327,7 @@ Configure controller-1
 
       * Configure the data interfaces for controller-1.
 
-        .. only:: starlingx
+        .. only:: starlingx and html
 
            .. tabs::
 
@@ -1367,7 +1367,7 @@ Configure controller-1
                     ~(keystone_admin)$ system interface-datanetwork-assign ${NODE} ${DATA0IFUUID} ${PHYSNET0}
                     ~(keystone_admin)$ system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
             :start-after: begin-config-data-interfaces-controller-1-dx
@@ -1423,7 +1423,7 @@ Optionally Configure PCI-SRIOV Interfaces
    * **For Kubernetes only:** To enable using |SRIOV| network attachments for
      the above interfaces in Kubernetes hosted application containers:
 
-     .. only:: starlingx
+     .. only:: starlingx and html
 
         .. tabs::
 
@@ -1442,7 +1442,7 @@ Optionally Configure PCI-SRIOV Interfaces
                  ~(keystone_admin)$ system host-label-assign controller-1 sriovdp=enabled
 
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_duplex_install_kubernetes.rest
          :start-after: begin-config-k8s-sriov-controller-1-dx
diff --git a/doc/source/deploy_install_guides/release/bare_metal/aio_simplex_install_kubernetes.rst b/doc/source/deploy_install_guides/release/bare_metal/aio_simplex_install_kubernetes.rst
index a48ce6a93..f925dac64 100644
--- a/doc/source/deploy_install_guides/release/bare_metal/aio_simplex_install_kubernetes.rst
+++ b/doc/source/deploy_install_guides/release/bare_metal/aio_simplex_install_kubernetes.rst
@@ -38,7 +38,7 @@ Overview
 Minimum hardware requirements
 -----------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -115,7 +115,7 @@ Minimum hardware requirements
                shown in the example above, you must reboot the server to fully
                install the apparmor-profile modules.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: begin-min-hw-reqs-sx
@@ -125,7 +125,7 @@ Minimum hardware requirements
 Installation Prerequisites
 --------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -148,7 +148,7 @@ Installation Prerequisites
          Alternately, you can get an older release ISO from `here <https://mirror.starlingx.cengn.ca/mirror/starlingx/release/>`__.
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/installation-prereqs.rest
       :start-after: begin-install-prereqs
@@ -158,7 +158,7 @@ Installation Prerequisites
 Prepare Servers for Installation
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -208,7 +208,7 @@ Prepare Servers for Installation
             virt-manager GUI is not absolutely required and you can safely
             ignore errors and continue.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: start-prepare-servers-common
@@ -218,7 +218,7 @@ Prepare Servers for Installation
 Install Software on Controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -257,7 +257,7 @@ Install Software on Controller-0
          the server to reboot. This can take 5-10 minutes, depending on the
          performance of the host machine.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/inc-install-software-on-controller.rest
       :start-after: incl-install-software-controller-0-aio-start
@@ -282,7 +282,7 @@ Bootstrap system on controller-0
 
 #. Verify and/or configure IP connectivity.
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -298,7 +298,7 @@ Bootstrap system on controller-0
                :start-after: begin-aio-sx-install-verify-ip-connectivity
                :end-before: end-aio-sx-install-verify-ip-connectivity
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
          :start-after: begin-aio-sx-install-verify-ip-connectivity
@@ -465,7 +465,7 @@ The newly installed controller needs to be configured.
 #. Configure the |OAM| interface of controller-0 and specify the attached
    network as "oam".
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -483,7 +483,7 @@ The newly installed controller needs to be configured.
               system host-if-modify controller-0 $OAM_IF -c platform
               system interface-network-assign controller-0 $OAM_IF oam
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
          :start-after: begin-config-controller-0-oam-interface-sx
@@ -491,7 +491,7 @@ The newly installed controller needs to be configured.
 
 #. Configure |NTP| servers for network time synchronization:
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -522,7 +522,7 @@ The newly installed controller needs to be configured.
 
                 ~(keystone_admin)$ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
          :start-after: begin-config-controller-0-ntp-interface-sx
@@ -571,7 +571,7 @@ The newly installed controller needs to be configured.
       on the |AIO| controller platform cores, additional platform cores may be
       required.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -589,7 +589,7 @@ The newly installed controller needs to be configured.
                platform in this scenario.
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-add-cores-sx
@@ -627,7 +627,7 @@ The newly installed controller needs to be configured.
 
    #. **For OpenStack only:** Configure the system setting for the vSwitch.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -670,7 +670,7 @@ The newly installed controller needs to be configured.
                environment OVS-DPDK is not supported, only |OVS| is supported.
                Therefore, simply use the default |OVS| vSwitch here.
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-vswitch-sx
@@ -680,7 +680,7 @@ The newly installed controller needs to be configured.
       based nova-local volume group, which is needed for |prefix|-openstack
       nova ephemeral disks.
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -701,7 +701,7 @@ The newly installed controller needs to be configured.
                   ~(keystone_admin)$ system host-fs-add ${NODE} instances=34
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-add-fs-sx
@@ -719,7 +719,7 @@ The newly installed controller needs to be configured.
 
       * Configure the data interfaces for controller-0.
 
-        .. only:: starlingx
+        .. only:: starlingx and html
 
            .. tabs::
 
@@ -760,7 +760,7 @@ The newly installed controller needs to be configured.
                     ~(keystone_admin)$ system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1}
 
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-data-interface-sx
@@ -817,7 +817,7 @@ Optionally Configure PCI-SRIOV Interfaces
    #. **For Kubernetes Only:** To enable using |SRIOV| network attachments for
       the above interfaces in Kubernetes hosted application containers:
 
-      .. only:: starlingx
+      .. only:: starlingx and html
 
          .. tabs::
 
@@ -835,7 +835,7 @@ Optionally Configure PCI-SRIOV Interfaces
 
                   ~(keystone_admin)$ system host-label-assign controller-0 sriovdp=enabled
 
-      .. only:: partner
+      .. only:: partner and (html or latex)
 
          .. include:: /shared/_includes/aio_simplex_install_kubernetes.rest
             :start-after: begin-config-controller-0-OS-k8s-sriov-sx
diff --git a/doc/source/deploy_install_guides/release/bare_metal/controller_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/release/bare_metal/controller_storage_install_kubernetes.rst
index 184dfcfa0..cc10f157d 100644
--- a/doc/source/deploy_install_guides/release/bare_metal/controller_storage_install_kubernetes.rst
+++ b/doc/source/deploy_install_guides/release/bare_metal/controller_storage_install_kubernetes.rst
@@ -38,7 +38,7 @@ Overview
 Minimum hardware requirements
 -----------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -52,7 +52,7 @@ Minimum hardware requirements
 
          .. include:: /shared/_includes/physical_host_req.txt
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: begin-min-hw-reqs-std
@@ -69,7 +69,7 @@ Minimum hardware requirements
 Installation Prerequisites
 --------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -91,7 +91,7 @@ Installation Prerequisites
          <https://mirror.starlingx.cengn.ca/mirror/starlingx/release/latest_release/debian/monolithic/outputs/iso/>`__.
          Alternately, you can get an older release ISO from `here <https://mirror.starlingx.cengn.ca/mirror/starlingx/release/>`__.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/installation-prereqs.rest
       :start-after: begin-install-prereqs
@@ -103,7 +103,7 @@ Installation Prerequisites
 Prepare Servers for Installation
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -156,7 +156,7 @@ Prepare Servers for Installation
             virt-manager GUI is not absolutely required and you can safely
             ignore errors and continue.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: start-prepare-servers-common
@@ -167,7 +167,7 @@ Prepare Servers for Installation
 Install Software on Controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -206,7 +206,7 @@ Install Software on Controller-0
          the server to reboot. This can take 5-10 minutes depending on the
          performance of the host machine.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/inc-install-software-on-controller.rest
       :start-after: incl-install-software-controller-0-standard-start
@@ -216,7 +216,7 @@ Install Software on Controller-0
 Bootstrap system on controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -232,7 +232,7 @@ Bootstrap system on controller-0
             :start-after: incl-bootstrap-controller-0-virt-controller-storage-start:
             :end-before: incl-bootstrap-controller-0-virt-controller-storage-end:
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-bootstrap-sys-controller-0-standard.rest
       :start-after: incl-bootstrap-sys-controller-0-standard-start
@@ -243,7 +243,7 @@ Bootstrap system on controller-0
 Configure controller-0
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -259,7 +259,7 @@ Configure controller-0
             :start-after: incl-config-controller-0-virt-controller-storage-start:
             :end-before: incl-config-controller-0-virt-controller-storage-end:
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-config-controller-0-storage.rest
       :start-after: incl-config-controller-0-storage-start
@@ -277,7 +277,7 @@ Configure controller-0
       These steps are required only if the |prod-os| application
       (|prefix|-openstack) will be installed.
 
-   .. only:: starlingx
+   .. only:: starlingx and html
 
       .. tabs::
 
@@ -312,7 +312,7 @@ Configure controller-0
 
 .. only:: openstack
 
-   .. only:: partner
+   .. only:: partner and (html or latex)
 
       .. include:: /shared/_includes/controller_storage_install_kubernetes.rest
          :start-after: begin-openstack-specific-host-configs-bare-metal
@@ -368,7 +368,7 @@ machine.
 Install software on controller-1 and worker nodes
 -------------------------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -474,7 +474,7 @@ Install software on controller-1 and worker nodes
                | 4  | worker-1     | worker      | locked         | disabled    | online       |
                +----+--------------+-------------+----------------+-------------+--------------+
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/controller_storage_install_kubernetes.rest
       :start-after: start-install-sw-on-controller-0-and-workers-standard-with-storage
@@ -486,7 +486,7 @@ Install software on controller-1 and worker nodes
 Configure controller-1
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -503,7 +503,7 @@ Configure controller-1
             :start-after: incl-config-controller-1-virt-controller-storage-start
             :end-before: incl-config-controller-1-virt-controller-storage-end
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-config-controller-1.rest
       :start-after: incl-config-controller-1-start:
@@ -567,7 +567,7 @@ machine.
 Configure worker nodes
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -704,7 +704,7 @@ Configure worker nodes
                done
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/controller_storage_install_kubernetes.rest
       :start-after: start-config-worker-nodes-std-with-storage-bare-metal
@@ -714,7 +714,7 @@ Configure worker nodes
 Optionally Configure PCI-SRIOV Interfaces
 *****************************************
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -728,7 +728,7 @@ Optionally Configure PCI-SRIOV Interfaces
 
          Not applicable
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/controller_storage_install_kubernetes.rest
       :start-after: start-config-pci-sriov-interfaces-standard-storage
@@ -763,7 +763,7 @@ If configuring host based Ceph Storage Backend, Add Ceph OSDs to controllers
    Currently |prod-os| does not support rook-ceph. If you plan on using
    |prod-os|, choose host-based Ceph.
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -816,7 +816,7 @@ If configuring host based Ceph Storage Backend, Add Ceph OSDs to controllers
                system host-stor-list $HOST
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/controller_storage_install_kubernetes.rest
       :start-after: start-add-ceph-osds-to-controllers-std-storage
diff --git a/doc/source/deploy_install_guides/release/bare_metal/dedicated_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/release/bare_metal/dedicated_storage_install_kubernetes.rst
index 0b78f707c..1c8c40690 100644
--- a/doc/source/deploy_install_guides/release/bare_metal/dedicated_storage_install_kubernetes.rst
+++ b/doc/source/deploy_install_guides/release/bare_metal/dedicated_storage_install_kubernetes.rst
@@ -37,7 +37,7 @@ Overview
 Minimum hardware requirements
 -----------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -51,7 +51,7 @@ Minimum hardware requirements
 
          .. include:: /shared/_includes/physical_host_req.txt
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: begin-min-hw-reqs-ded
@@ -63,7 +63,7 @@ Minimum hardware requirements
 Installation Prerequisites
 --------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -87,7 +87,7 @@ Installation Prerequisites
          <https://mirror.starlingx.cengn.ca/mirror/starlingx/release/>`__.
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/installation-prereqs.rest
       :start-after: begin-install-prereqs
@@ -99,7 +99,7 @@ Installation Prerequisites
 Prepare Servers for Installation
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -155,7 +155,7 @@ Prepare Servers for Installation
             ignore errors and continue.
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
       :start-after: start-prepare-servers-common
@@ -165,7 +165,7 @@ Prepare Servers for Installation
 Install Software on Controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -204,7 +204,7 @@ Install Software on Controller-0
          the server to reboot. This can take 5-10 minutes depending on the
          performance of the host machine.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/inc-install-software-on-controller.rest
       :start-after: incl-install-software-controller-0-standard-start
@@ -214,7 +214,7 @@ Install Software on Controller-0
 Bootstrap system on controller-0
 --------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -230,7 +230,7 @@ Bootstrap system on controller-0
             :start-after: incl-bootstrap-controller-0-virt-controller-storage-start:
             :end-before: incl-bootstrap-controller-0-virt-controller-storage-end:
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-bootstrap-sys-controller-0-standard.rest
       :start-after: incl-bootstrap-sys-controller-0-standard-start
@@ -240,7 +240,7 @@ Bootstrap system on controller-0
 Configure controller-0
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -257,7 +257,7 @@ Configure controller-0
             :end-before: incl-config-controller-0-virt-controller-storage-end:
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-config-controller-0-storage.rest 
       :start-after: incl-config-controller-0-storage-start
@@ -287,7 +287,7 @@ machine.
 Install software on controller-1, storage nodes, and worker nodes
 -----------------------------------------------------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -432,7 +432,7 @@ Install software on controller-1, storage nodes, and worker nodes
                | 6  | worker-1     | worker      | locked         | disabled    | online       |
                +----+--------------+-------------+----------------+-------------+--------------+
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/dedicated_storage_install_kubernetes.rest
       :start-after: begin-install-sw-cont-1-stor-and-wkr-nodes
@@ -442,7 +442,7 @@ Install software on controller-1, storage nodes, and worker nodes
 Configure controller-1
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -458,7 +458,7 @@ Configure controller-1
             :start-after: incl-config-controller-1-virt-controller-storage-start
             :end-before: incl-config-controller-1-virt-controller-storage-end
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/incl-config-controller-1.rest
       :start-after: incl-config-controller-1-start:
@@ -468,7 +468,7 @@ Configure controller-1
 Unlock controller-1
 -------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -484,7 +484,7 @@ Unlock controller-1
             :start-after: incl-unlock-controller-1-virt-controller-storage-start:
             :end-before: incl-unlock-controller-1-virt-controller-storage-end:
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: controller_storage_install_kubernetes.rst
       :start-after: incl-unlock-controller-1-start:
@@ -496,7 +496,7 @@ Unlock controller-1
 Configure storage nodes
 -----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -551,7 +551,7 @@ Configure storage nodes
          
                system host-stor-list $HOST
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/dedicated_storage_install_kubernetes.rest
       :start-after: begin-dedicated-config-storage-nodes
@@ -577,7 +577,7 @@ host machine.
 Configure worker nodes
 ----------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -684,7 +684,7 @@ Configure worker nodes
                done
 
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/dedicated_storage_install_kubernetes.rest
       :start-after: begin-dedicated-stor-config-workers
@@ -694,7 +694,7 @@ Configure worker nodes
 Optionally Configure PCI-SRIOV Interfaces
 *****************************************
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -708,7 +708,7 @@ Optionally Configure PCI-SRIOV Interfaces
 
          Not applicable.
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/dedicated_storage_install_kubernetes.rest
       :start-after: begin-dedicated-conf-pci-sriov-interfaces
@@ -718,7 +718,7 @@ Optionally Configure PCI-SRIOV Interfaces
 Unlock worker nodes
 -------------------
 
-.. only:: starlingx
+.. only:: starlingx and html
 
    .. tabs::
 
@@ -734,7 +734,7 @@ Unlock worker nodes
             :start-after: incl-unlock-compute-nodes-virt-controller-storage-start:
             :end-before: incl-unlock-compute-nodes-virt-controller-storage-end:
 
-.. only:: partner
+.. only:: partner and (html or latex)
 
    .. include:: /shared/_includes/dedicated_storage_install_kubernetes.rest
       :start-after: begin-dedicated-unlock-workers