.. Data networks file, created by
   sphinx-quickstart on Thu Sep  3 15:14:59 2020.
   You can adapt this file completely to your liking, but it should at least
   contain the root `toctree` directive.

=============
Data Networks
=============

----------
Kubernetes
----------

.. toctree::
   :maxdepth: 1

   data-network-management-data-networks

***********************************
Displaying data network information
***********************************

.. toctree::
   :maxdepth: 1

   displaying-data-network-information-using-horizon
   displaying-data-network-information-using-the-cli
   the-data-network-topology-view

*********************************************
Adding, assigning, and removing data networks
*********************************************

.. toctree::
   :maxdepth: 1

   adding-data-networks-using-the-cli
   assigning-a-data-network-to-an-interface
   removing-a-data-network-using-the-cli

-------------------
StarlingX OpenStack
-------------------

.. toctree::
   :maxdepth: 1

   data-networks-overview

*******************
VXLAN data networks
*******************

.. toctree::
   :maxdepth: 1

   dynamic-vxlan
   static-vxlan
   differences-between-dynamic-and-static-vxlan-modes

**************************
Adding segmentation ranges
**************************

.. toctree::
   :maxdepth: 1

   adding-segmentation-ranges-using-the-cli

************************************
Data network interface configuration
************************************

.. toctree::
   :maxdepth: 1

   configuring-data-interfaces
   configuring-data-interfaces-for-vxlans

******************************
MTU values of a data interface
******************************

.. toctree::
   :maxdepth: 1

   changing-the-mtu-of-a-data-interface-using-the-cli
   changing-the-mtu-of-a-data-interface

***********************************
VXLAN data network setup completion
***********************************

.. toctree::
   :maxdepth: 1

   adding-a-static-ip-address-to-a-data-interface
   managing-data-interface-static-ip-addresses-using-the-cli
   using-ip-address-pools-for-data-interfaces
   managing-ip-address-pools-using-the-cli
   adding-and-maintaining-routes-for-a-vxlan-network