Ron Stone 11ded0cf7e Data Networks guide

Applied M. Camp's comments on patchset 4.
Also, some additional formatting changes such as tidying line ends <= 79
characters, reformatting very wide ascii table as list table to control
line widths, etc.

Resolved conflict in _includes/data-networks-overview.rest

Change-Id: I8a2a80f21d3630849900e85dc2495da1668648af
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Signed-off-by: Stone <ronald.stone@windriver.com>

2020-11-23 09:17:34 -05:00

2.3 KiB

Raw Blame History

Data Networks

Kubernetes

data-network-management-data-networks

Displaying data network information

displaying-data-network-information-using-horizon displaying-data-network-information-using-the-cli the-data-network-topology-view

Adding, assigning, and removing data networks

adding-data-networks-using-the-cli assigning-a-data-network-to-an-interface removing-a-data-network-using-the-cli

StarlingX OpenStack

data-networks-overview

VXLAN data networks

dynamic-vxlan static-vxlan differences-between-dynamic-and-static-vxlan-modes

Adding segmentation ranges

adding-segmentation-ranges-using-the-cli

Data network interface configuration

configuring-data-interfaces configuring-data-interfaces-for-vxlans

MTU values of a data interface

changing-the-mtu-of-a-data-interface-using-the-cli changing-the-mtu-of-a-data-interface

VXLAN data network setup completion

adding-a-static-ip-address-to-a-data-interface managing-data-interface-static-ip-addresses-using-the-cli using-ip-address-pools-for-data-interfaces managing-ip-address-pools-using-the-cli adding-and-maintaining-routes-for-a-vxlan-network

2.3 KiB Raw Blame History