Thales Elero Cervi bc0870eade PCI-PT configuration when SR-IOV is not available (stx 7.0, stx8, ds7)

There is a known limitation [1] and NICs that do not support SR-IOV
require a different procedure [2] when configuring PCI-PT.

This change adds a note on checking SR-IOV support for the target NIC,
when configuring PCI-Passthrough for it, and adds the necessary
steps for the configuration to work properly whit this type of NIC.

For completeness, it also duplicates the PCI-PT example for when
configuring PCI SRIOV Ethernet Interfaces, with the necessary
changes to the procedure.

[1] https://bugs.launchpad.net/starlingx/+bug/1836682
[2] https://wiki.openstack.org/wiki/StarlingX/Networking#Useful_Networking_Commands

Partial-bug: 1836682

Signed-off-by: Thales Elero Cervi <thaleselero.cervi@windriver.com>
Change-Id: I7258ab34cb7ce69a2f4b82c682f72d9467d95c70

2022-09-12 14:38:38 +00:00

920 B

Raw Blame History

partner

node-management-overview adding-compute-nodes-to-an-existing-duplex-system using-labels-to-identify-openstack-nodes

PCI Device Access for VMs

pci-passthrough-ethernet-interface-devices configuring-pci-passthrough-ethernet-interfaces configure-pci-passthrough-interface-to-nvidia-gpu generic-pci-passthrough pci-sr-iov-ethernet-interface-devices sr-iov-encryption-acceleration pci-device-access-for-vms configuring-a-flavor-to-use-a-generic-pci-device exposing-a-generic-pci-device-for-use-by-vms exposing-a-generic-pci-device-using-the-cli

920 B Raw Blame History

PCI Device Access for VMs

920 B

Raw Blame History