docs/doc/source/system_configuration/kubernetes/configuring-ntp-servers-and-services-using-the-cli.rst
egoncalv c12cf2bc59 Replaced relase version to nn.nn
Solved building and merge conflict problem.

Signed-off-by: egoncalv <elisamaraaoki.goncalves@windriver.com>
Change-Id: I9272fa6246bd60ace6a5f7ba64fdb4181b1e4721
2021-06-14 20:16:28 -03:00

161 lines
9.2 KiB
ReStructuredText

.. ktx1552673128591
.. _configuring-ntp-servers-and-services-using-the-cli:
===================================
Configure NTP Servers Using the CLI
===================================
You can use the CLI to add or update a list of |NTP| servers and services.
**NTP Servers**
You can specify up to three |NTP| servers using the CLI or the Horizon Web
interface. For more information, see :ref:`Configure NTP Servers Using Horizon <configuring-ntp-servers-and-services-using-horizon>`.
To view the existing |NTP| server configuration, use the following command.
.. code-block:: none
~(keystone_admin)]$ system ntp-show
+--------------+----------------------------------------------+
| Property | Value |
+--------------+----------------------------------------------+
| uuid | c65d5dcd-de6c-4ff9-89a1-c385dd4c7310 |
| ntpservers | 0.pool.ntp.org,1.pool.ntp.org,3.pool.ntp.org |
| isystem_uuid | a16d7b07-1d42-41cf-b001-04bc25216a2b |
| created_at | 2019-12-07T18:31:14.242942+00:00 |
| updated_at | 2019-12-07T18:42:09.244572+00:00 |
+--------------+----------------------------------------------+
.. note::
When you change the |NTP| system configuration you must lock/unlock all
hosts. This process requires a swact on the controllers. During a host
swact the system may raise |NTP| alarms.
To change the |NTP| server IP addresses, use the following command syntax. The
ntpservers option takes a comma-delimited list of |NTP| server names.
.. code-block:: none
~(keystone_admin)]$ system ntp-modify \
ntpservers=<server_1[,server_2][,server_3]>
For example:
.. code-block:: none
~(keystone_admin)]$ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org,3.pool.ntp.org
**NTP Service**
Clock synchronization, synchronizes time across multiple systems in a
network. The default value for **clock\_synchronization** is **ntp**.
.. xbooklink For more information on configuring the NTP service for clock
synchronization, see |node-doc|: `Host Inventory <hosts-tab>`.
.. note::
|NTP| and |PTP| is configured per host. Lock/unlock the host when
updating **clock\_synchronization** for the host.
Use the following command to change the clock synchronization on the host:
.. code-block:: none
~(keystone_admin)]$ system host-update controller-0 clock_synchronization=ntp
+-----------------------+--------------------------------------------+
| Property | Value |
+-----------------------+--------------------------------------------+
| action | none |
| administrative | unlocked |
| availability | available |
| bm_ip | None |
| bm_type | None |
| bm_username | None |
| boot_device | /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 |
| capabilities | {u'stor_function': u'monitor'} |
| clock_synchronization | ntp |
| config_applied | 16dfa935-e21e-4737-90f4-1afa83a3091b |
| config_status | None |
| config_target | 16dfa935-e21e-4737-90f4-1afa83a3091b |
| console | ttyS0,115200n8 |
| created_at | 2020-02-27T15:00:07.108865+00:00 |
| hostname | controller-0 |
| id | 1 |
| install_output | text |
| install_state | None |
| install_state_info | None |
| inv_state | inventoried |
| invprovision | provisioned |
| location | {} |
| mgmt_ip | 192.168.204.3 |
| mgmt_mac | 00:00:00:00:00:00 |
| operational | enabled |
| personality | controller |
| reserved | False |
| rootfs_device | /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 |
| serialid | None |
| software_load | nn.nn |
| subfunction_avail | available |
| subfunction_oper | enabled |
| subfunctions | controller,worker |
| task | |
| tboot | false |
| ttys_dcd | None |
| updated_at | 2020-02-28T17:21:42.374847+00:00 |
| uptime | 7403 |
| uuid | cc870915-b8dd-4989-914c-7095eabe36e8 |
| vim_progress_status | services-enabled |
+-----------------------+--------------------------------------------+
To view the |NTP| service configuration, use the following command:
.. code-block:: none
~(keystone_admin)]$ system host-show controller-0
+-----------------------+------------------------------------------------+
| Property | Value |
+-----------------------+------------------------------------------------+
| action | none |
| administrative | unlocked |
| availability | available |
| bm_ip | None |
| bm_type | None |
| bm_username | None |
| boot_device | /dev/disk/by-path/pci-0000:04:00.0-sas |
| |-0x5001e6754aa38000-lun-0 |
| capabilities | {u'stor_function': u'monitor', u'Personality': |
| | u'Controller-Active'} |
| clock_synchronization | ntp |
| config_applied | 590f29ad-19e2-43ee-855e-f765814e3ecd |
| config_status | Config out-of-date |
| config_target | cd18ec25-c030-4b0c-862b-c39726275743 |
| console | ttyS0,115200n8 |
| created_at | 2020-02-27T18:32:58.752361+00:00 |
| hostname | controller-0 |
| id | 1 |
| install_output | text |
| install_state | None |
| install_state_info | None |
| inv_state | inventoried |
| invprovision | provisioned |
| location | {} |
| mgmt_ip | 192.168.204.3 |
| mgmt_mac | 00:1e:67:54:aa:39 |
| operational | enabled |
| personality | controller |
| reserved | False |
| rootfs_device | /dev/disk/by-path/pci-0000:04:00.0-sas |
| | -0x5001e6754aa38000-lun-0 |
| serialid | None |
| software_load | nn.nn |
| task | |
| tboot | false |
| ttys_dcd | None |
| updated_at | 2020-02-28T15:17:06.658008+00:00 |
| uptime | 159970 |
| uuid | 92c86da2-adb7-4fb2-92fc-82759e25108d |
| vim_progress_status | services-enabled |
+-----------------------+------------------------------------------------+