ebdf63ec68
Node Management index: change BCM to BMC Fault Management guide: remove “ing” from title of 2 topics Change-Id: I33b4c29e2ca92e842f585f4bb641780b52769206 Signed-off-by: MCamp859 <maryx.camp@intel.com>
41 lines
1.0 KiB
ReStructuredText
41 lines
1.0 KiB
ReStructuredText
|
|
.. maj1552680619436
|
|
.. _unsuppressing-an-alarm-using-the-cli:
|
|
|
|
=================================
|
|
Unsuppress an Alarm Using the CLI
|
|
=================================
|
|
|
|
If you need to reactivate a suppressed alarm, you can do so using the CLI.
|
|
|
|
.. rubric:: |proc|
|
|
|
|
- Use the :command:`fm event-unsuppress` CLI command to unsuppress a
|
|
currently suppressed alarm.
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ fm event-unsuppress [--nowrap] --alarm_id <alarm-id>[,<alarm-id>] \
|
|
[--nopaging] [--uuid]
|
|
|
|
where
|
|
|
|
``<alarm-id>``
|
|
is a comma separated **Alarm ID** list of alarms to unsuppress.
|
|
|
|
``--nowrap``
|
|
disables output wrapping.
|
|
|
|
``--nopaging``
|
|
disables paged output
|
|
|
|
``--uuid``
|
|
includes the alarm type UUIDs in the output.
|
|
|
|
Alarm type\(s\) with the specified <alarm-id\(s\)> will be unsuppressed.
|
|
|
|
You can unsuppress all currently suppressed alarms using the following command:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ fm event-unsuppress -all [--nopaging] [--uuid] |