docs/doc/source/fault-mgmt/viewing-suppressed-alarms-using-the-cli.rst
Stone 037c99f0b7 Fault Management doc
Added Data Networks toctree

Changed case on doc title in top level index - changed doc directory to
fault-mgmt.

Added Distributed Cloud section.

Broke out "OpenStack Fault Management Overview" statement about remote log
collection to conditionally included file.

Incorporated patch 6 review comments. Also implemented rST :abbr:
for first instance of SNMP in each file.

Changed port number and community string in two SNMP walk examples.

Change-Id: I1afd71265e752c4c9a54bf2dc9a173b3e17332a7
Signed-off-by: Stone <ronald.stone@windriver.com>
2020-11-27 14:13:00 -05:00

49 lines
1.4 KiB
ReStructuredText

.. ohs1552680649558
.. _viewing-suppressed-alarms-using-the-cli:
====================================
View Suppressed Alarms Using the CLI
====================================
Alarms may be suppressed. List them to determine if any need to be unsuppressed
or otherwise managed.
.. rubric:: |proc|
.. _viewing-suppressed-alarms-using-the-cli-steps-hyn-g1x-nkb:
- Use the :command:`fm event-suppress-list` CLI command to view a list of
all currently suppressed alarms.
This command shows all alarm IDs along with their suppression status.
.. code-block:: none
~(keystone_admin)$ fm event-suppress-list [--nopaging] [--uuid] [--include-unsuppressed]
where
**--nopaging**
disables paged output, see :ref:`CLI Commands and Paged Output <cli-commands-and-paged-output>`
**--uuid**
includes the alarm type UUIDs in the output
**--include-unsuppressed**
includes unsuppressed alarm types in the output. By default only
suppressed alarm types are shown.
For example:
.. code-block:: none
[sysadmin@controller-0 ~(keystone_admin)] fm event-suppress-list
+----------+-------------+
| Event ID | Status |
+----------+-------------+
| 100.101 | suppressed |
| 100.103 | suppressed |
| 100.105 | suppressed |
| ... | ... |
+----------+-------------+