63cd4f5fdc
Incorporated patchset 1 review comments Updated patchset 5 review comments Updated patchset 6 review comments Fixed merge conflicts Updated patchset 8 review comments Change-Id: Icd7b08ab69273f6073b960a13cf59905532f851a Signed-off-by: Juanita-Balaraj <juanita.balaraj@windriver.com>
74 lines
2.8 KiB
ReStructuredText
74 lines
2.8 KiB
ReStructuredText
|
|
.. jpu1552672927783
|
|
.. _changing-the-oam-ip-configuration-using-the-cli:
|
|
|
|
=============================================
|
|
Change the OAM IP Configuration Using the CLI
|
|
=============================================
|
|
|
|
If you prefer, you can use the CLI to view or change the |OAM| IP Configuration.
|
|
|
|
To view the existing |OAM| IP configuration, use the following command.
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)]$ system oam-show
|
|
+-----------------+--------------------------------------+
|
|
| Property | Value |
|
|
+-----------------+--------------------------------------+
|
|
| created_at | 2018-05-16T20:06:25.523495+00:00 |
|
|
| isystem_uuid | b0380a56-697c-42f7-97bc-f1e407111416 |
|
|
| oam_c0_ip | 10.10.10.3 |
|
|
| oam_c1_ip | 10.10.10.4 |
|
|
| oam_floating_ip | 10.10.10.2 |
|
|
| oam_gateway_ip | 10.10.10.1 |
|
|
| oam_subnet | 10.10.10.0/24 |
|
|
| updated_at | None |
|
|
| uuid | 2818e7c4-f730-43bd-b33d-eaff53a92ee1 |
|
|
+-----------------+--------------------------------------+
|
|
|
|
To change the OAM IP subnet, floating IP address, gateway IP address, or
|
|
controller IP addresses, use the following command syntax.
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)]$ system oam-modify oam_subnet=<subnet>/<netmask> \
|
|
oam_gateway_ip=<gateway_ip_address> \
|
|
oam_floating_ip=<floating_IP_address> \
|
|
oam_c0_ip=<controller-0_IP_address> \
|
|
oam_c1_ip=<controller-1_ip_address>
|
|
|
|
For example:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)]$ system oam-modify oam_subnet=10.10.10.0/24 \
|
|
oam_gateway_ip=10.10.10.1 \
|
|
oam_floating_ip=10.10.10.2 \
|
|
oam_c0_ip=10.10.10.3 \
|
|
oam_c1_ip=10.10.10.4
|
|
|
|
.. note::
|
|
On AIO Simplex systems, the
|
|
oam\_floating\_ip, oam\_c0\_ip and oam\_c0\_ip parameters are not
|
|
supported. To change the |OAM| IP address of a Simplex System, the parameter
|
|
oam\_ip must be used in combination with oam\_gateway\_ip and oam\_subnet.
|
|
|
|
For example:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)]$ system oam-modify oam_subnet=10.10.10.0/24 oam_gateway_ip=10.10.10.1 oam_ip=10.10.10.2
|
|
|
|
.. note::
|
|
If you change the IP address version \(IPv4 or IPv6\), ensure that the
|
|
same version is used for the DNS and NTP servers.
|
|
|
|
After changing the |OAM| server configuration, you must lock and unlock the
|
|
controllers. This process requires a swact on the controllers. Then you must
|
|
lock and unlock the worker nodes one at a time, ensuring that sufficient
|
|
resources are available to migrate any running instances.
|
|
|
|
.. note::
|
|
On AIO Simplex systems you do not need to lock and unlock the host. The
|
|
changes are applied automatically. |