3dbc75a4d6
Add mention of Logan Beach NIC in all PTP contexts where Westport Channel NIC is currenty mentioned. Signed-off-by: Ron Stone <ronald.stone@windriver.com> Change-Id: I9952a6803a11bd0982a0ac853a69826e8b121b34
10 KiB
Configure PTP Service Using the CLI
You can use the CLI to configure services.
PTP Service
To view the existing status, use the following commands.
~(keystone_admin)]$ system ptp-instance-list
~(keystone_admin)]$ system host-ptp-instance-list <host>Warning
and are mutually exclusive on a particular host; only one can be enabled at any time.
The default value for clock_synchronization is ntp. Use the following command to change the clock synchronization on the host. and are configured per host. Lock/unlock the host when updating.
~(keystone_admin)]$ system host-update controller-0 clock_synchronization=ptp
+-----------------------+---------------------------------------+
| Property | Value |
+-----------------------+---------------------------------------+
| action | none |
| administrative | unlocked |
| availability | available |
| bm_ip | None |
| bm_type | None |
| bm_username | None |
| boot_device | /dev/disk/by-path/pci-0000:04:00.0-sas|
| | -0x5001e6754aa38000-lun-0 |
| capabilities | {u'stor_function': u'monitor'} |
| clock_synchronization | ptp |
| config_applied | 590f29ad-19e2-43ee-855e-f765814e3ecd |
| config_status | None |
| config_target | 590f29ad-19e2-43ee-855e-f765814e3ecd |
| console | ttyS0,115200n8 |
| created_at | 2019-12-07T18:32:58.752361+00:00 |
| hostname | controller-0 |
| id | 1 |
| install_output | text |
| install_state | None |
| install_state_info | None |
| inv_state | inventoried |
| invprovision | provisioned |
| location | {} |
| mgmt_ip | 192.168.204.3 |
| mgmt_mac | 00:1e:67:54:aa:39 |
| operational | enabled |
| personality | controller |
| reserved | False |
| rootfs_device | /dev/disk/by-path/pci-0000:04:00.0 |
| | -sas-0x5001e6754aa38000-lun-0 |
| serialid | None |
| software_load | nn.nn |
| task | |
| tboot | false |
| ttys_dcd | None |
| updated_at | 2019-12-07T21:17:28.627489+00:00 |
| uptime | 9020 |
| uuid | 92c86da2-adb7-4fb2-92fc-82759e25108d |
| vim_progress_status | services-enabled |
+-----------------------+---------------------------------------+To view the service configuration, use the following command:
~(keystone_admin)]$ system host-show controller-0
+-----------------------+------------------------------------------------+
| Property | Value |
+-----------------------+------------------------------------------------+
| action | none |
| administrative | unlocked |
| availability | available |
| bm_ip | None |
| bm_type | None |
| bm_username | None |
| boot_device | /dev/disk/by-path/pci-0000:04:00.0-sas |
| |-0x5001e6754aa38000-lun-0 |
| capabilities | {u'stor_function': u'monitor', u'Personality': |
| | u'Controller-Active'} |
| clock_synchronization | ptp |
| config_applied | 590f29ad-19e2-43ee-855e-f765814e3ecd |
| config_status | Config out-of-date |
| config_target | cd18ec25-c030-4b0c-862b-c39726275743 |
| console | ttyS0,115200n8 |
| created_at | 2019-12-09T16:10:19.143372+00:00 |
| hostname | controller-0 |
| id | 1 |
| install_output | text |
| install_state | None |
| install_state_info | None |
| inv_state | inventoried |
| invprovision | provisioned |
| location | {} |
| mgmt_ip | 192.168.204.3 |
| mgmt_mac | 00:1e:67:54:aa:39 |
| operational | enabled |
| personality | controller |
| reserved | False |
| rootfs_device | /dev/disk/by-path/pci-0000:04:00.0-sas |
| | -0x5001e6754aa38000-lun-0 |
| serialid | None |
| software_load | nn.nn |
| task | |
| tboot | false |
| ttys_dcd | None |
| updated_at | 2019-12-10T14:55:58.595239+00:00 |
| uptime | 159970 |
| uuid | 92c86da2-adb7-4fb2-92fc-82759e25108d |
| vim_progress_status | services-enabled |
+-----------------------+------------------------------------------------+PTP Instance Configuration
instances are the top level configuration unit. The supported instance types are:
ptp4l-
Represents an instance of
ptp4l. A node may have several of these instances. phc2sys-
Represents an instance of
phc2sys. A node will generally only have one of these. ts2phc-
Represents an instance of
ts2phc. clock-
clockis not an daemon or service, but instead an abstract unit used to hold the interfaces and configuration for setting Westport Channel or Logan Beach NIC control parameters (syncE and PPS transmission).
Valid instance level parameters are found in the man pages for each service, under:
- GLOBAL OPTIONS - ptp4l
- OPTIONS - phc2sys
- GLOBAL OPTIONS - ts2phc
- None for clock
Set host to use :
~(keystone_admin)]$ system host-update controller-0 clock_synchronization=ptpCreate an instance and assigning parameters
Create an instance by providing a name and type.
~(keystone_admin)]$ system ptp-instance-add myptp1 ptp4lAdd any required instance level parameters.
~(keystone_admin)]$ system ptp-instance-parameter-add myptp1 domainNumber=24 slaveOnly=0
Create an interface and assign to ports
Create an interface unit by providing a name and assigning it to an instance.
~(keystone_admin)]$ system ptp-interface-add ptpinterface myptp1Add ports to the interface.
~(keystone_admin)]$ system host-if-ptp-assign controller-0 oam0 ptpinterfaceAdd interface level parameters as required.
~(keystone_admin)]$ system ptp-interface-parameter-add ptpinterface masterOnly=1Note
Multiple ports may be assigned to an interface in order to simplify parameter application.
~(keystone_admin)]$ system host-if-ptp-assign controller-0 data0 ptpinterface ~(keystone_admin)]$ system ptp-interface-show ptpinterfaceAssign the instance to a host and apply the configuration.
Assign the instance to a host so that the configuration can be applied.
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 myptp1Apply the configuration and verify that it completed.
~(keystone_admin)]$ system ptp-instance-apply ~(keystone_admin)]$ fm alarm-list