docs/doc/source/datanet/displaying-data-network-information-using-the-cli.rst
Ron Stone 11ded0cf7e Data Networks guide
Applied M. Camp's comments on patchset 4.
Also, some additional formatting changes such as tidying line ends <= 79
characters, reformatting very wide ascii table as list table to control
line widths, etc.

Resolved conflict in _includes/data-networks-overview.rest

Change-Id: I8a2a80f21d3630849900e85dc2495da1668648af
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Signed-off-by: Stone <ronald.stone@windriver.com>
2020-11-23 09:17:34 -05:00

39 lines
1.3 KiB
ReStructuredText

.. anh1559818482640
.. _displaying-data-network-information-using-the-cli:
==============================================
Display Data Network Information Using the CLI
==============================================
You can display information about data networks from the CLI.
.. rubric:: |proc|
.. _displaying-data-network-information-using-the-cli-steps-zln-xky-hkb:
#. Retrieve the names of the data networks.
.. code-block:: none
~(keystone_admin)$ system datanetwork-list
+--------------------------------------+--------------+----------+------+
| uuid | name | network_ | mtu |
| | | type | |
+--------------------------------------+--------------+----------+------+
| 3a575af8-01a7-44ca-9519-edaa2f06c74b | group0-data0 | vlan | 1500 |
+--------------------------------------+--------------+----------+------+
#. Review information for a data network from the CLI.
.. code-block:: none
~(keystone_admin)$ system datanetwork-show <datanet>
Where <datanet> is the name or UUID of the data network.
For example:
.. code-block:: none
~(keystone_admin)$ system datanetwork-show group0-data0