starlingx/docs
Code Issues Proposed changes
docs/doc/source/system_configuration/kubernetes/changing-the-mtu-of-an-oam-interface-using-horizon.rst
Adil e6d6e84cad Reorganize Content of Guides 
- Sys Config Guide
   - Node Management Guide

Topic already in Sys Config Guide with different names (deleted).
Added links to topics

Moved links to other topics according to review.

Signed-off-by: Adil <mohamed.adilassakkali@windriver.com>
Change-Id: Ifb015461a60bedd7b5ddd8cee651ac41fc038c3f
2021-06-14 09:22:08 -03:00

1.6 KiB
Raw Blame History

Change the MTU of an OAM Interface Using Horizon

You can change the value of an interface from the Horizon Web interface.

If you prefer, you can use the CLI. See Change the MTU of an OAM Interface Using the CLI <changing-the-mtu-of-an-oam-interface-using-the-cli>.

Controller configuration changes require each controller to be locked. This requires a swact during the procedure.

  1. Lock the standby controller.

    1. From Admin > Platform > Host Inventory, select the Hosts tab.

    2. From the Edit menu for the standby controller, select Lock Host.

  2. Edit the interface to change the value.

    1. Click the name of the standby controller, then select the Interfaces tab and click Edit for the interface.
    2. In the Edit Interface dialog, edit the MTU field, and then click Save.

  3. Unlock the standby controller.

    From the Edit menu for the standby controller, select Unlock Host.

  4. Swact the hosts.

    From the Edit menu for the active controller, select Swact Host.

  5. Lock the new standby controller.

  6. Modify the of the interface on the new standby controller.

  7. Unlock the standby controller.