starlingx/docs
Code Issues Proposed changes
docs/doc/source/updates/kubernetes/manual-upgrade-overview.rst
Ron Stone 0012d76f09 Add updates and upgrades content 
Some substitutions also added to accomodate StX vs partner file naming.
Add 750.006 alarm to performing-an-orchestrated-upgrade

Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Change-Id: I33588f3c1b22cd0dbc96133cf8eb056c8c2e5162
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
2021-05-17 07:12:27 -04:00

1.4 KiB
Raw Blame History

Manual Upgrade Overview

enables you to upgrade the software across your Simplex, Duplex, Standard, , and subcloud deployments.

Note

Upgrading is distinct from upgrading other configurations.

An upgrade can be performed manually or by the Upgrade Orchestrator which automates a rolling install of an update across all of the hosts. This section describes the manual upgrade procedures.

Before starting the upgrades process, the system must be “patch current,” there must be no management-affecting alarms present on the system, the new software load must be imported, and a valid license file for the upgrade must be installed.

The upgrade procedure is different for the All-in-One Simplex configuration versus the All-in-One Duplex, and Standard configurations. For more information, see:

  • Upgrading All-in-One Simplex <upgrading-all-in-one-simplex>
  • Upgrading All-in-One Duplex / Standard <upgrading-all-in-one-duplex-or-standard>