46dace05d5
Added the following pages for the NFD up version installation. 1. Install Node Feature Discovery (NFD) StarlingX Application 2. Uninstall Node Feature Discovery (NFD) StarlingX Application 3. Removed the page "Run the node feature discovery helm chart" from the repo and index as well. Change-Id: I9beda664b01a0d8644cd7683f5045d6f275cf5cb Signed-off-by: Dinesh Neelapu <dinesh.neelapu@windriver.com>
402 lines
11 KiB
ReStructuredText
402 lines
11 KiB
ReStructuredText
.. _index-node-mgmt-kub-5ff5993b9c60:
|
|
|
|
.. include:: /_includes/toc-title-node-kub.rest
|
|
|
|
.. only:: partner
|
|
|
|
.. include:: /node_management/index-node-mgmt-cd0f9d8eaee6.rst
|
|
:start-after: kub-begin
|
|
:end-before: kub-end
|
|
|
|
------------
|
|
Introduction
|
|
------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 2
|
|
|
|
displaying-worker-host-information
|
|
|
|
|
|
------------------------
|
|
The life cycle of a host
|
|
------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
the-life-cycle-of-a-host-93640aa2b707
|
|
host-status-and-alarms-during-system-configuration-changes
|
|
|
|
--------------
|
|
Host inventory
|
|
--------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
host_inventory/hosts-tab
|
|
host_inventory/host-details-page
|
|
host_inventory/overview-tab
|
|
host_inventory/processor-tab
|
|
host_inventory/memory-tab
|
|
host_inventory/storage-tab
|
|
host_inventory/filesystems-tab
|
|
host_inventory/ports-tab
|
|
host_inventory/interfaces-tab
|
|
host_inventory/lldp-tab
|
|
host_inventory/sensors-tab
|
|
host_inventory/devices-tab
|
|
host_inventory/labels-tab
|
|
|
|
-----------------
|
|
Common host tasks
|
|
-----------------
|
|
|
|
*******************************
|
|
Common host tasks using Horizon
|
|
*******************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
common_host_tasks/locking-a-host-using-horizon
|
|
common_host_tasks/force-locking-a-host-using-horizon
|
|
common_host_tasks/swacting-a-master-controller-using-horizon
|
|
common_host_tasks/unlocking-a-host-using-horizon
|
|
common_host_tasks/rebooting-a-host-using-horizon
|
|
common_host_tasks/powering-off-a-host-using-horizon
|
|
common_host_tasks/powering-on-a-host-using-horizon
|
|
common_host_tasks/reinstalling-a-host-using-horizon
|
|
common_host_tasks/resetting-a-host-using-horizon
|
|
common_host_tasks/deleting-a-host-using-horizon
|
|
|
|
*******************************
|
|
Common host tasks using the CLI
|
|
*******************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
common_host_tasks/locking-a-host-using-the-cli
|
|
common_host_tasks/force-locking-a-host-using-the-cli
|
|
common_host_tasks/swacting-a-master-controller-using-the-cli
|
|
common_host_tasks/unlocking-a-host-using-the-cli
|
|
common_host_tasks/rebooting-a-host-using-the-cli
|
|
common_host_tasks/powering-off-a-host-using-the-cli
|
|
common_host_tasks/powering-on-a-host-using-the-cli
|
|
common_host_tasks/resetting-a-host-using-the-cli
|
|
common_host_tasks/deleting-a-host-using-the-cli
|
|
|
|
------------------------------
|
|
Configuring CPU core behaviour
|
|
------------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
configuring_cpu_core_assignments/configuring-cpu-core-assignments
|
|
configuring_cpu_core_assignments/changing-the-hyper-threading-status
|
|
host-cpu-mhz-parameters-configuration-d9ccf907ede0
|
|
single-physical-core-for-platform-function-in-all-in-one-deployments-bec61d5a13f4
|
|
|
|
------------------------
|
|
Host memory provisioning
|
|
------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
host_memory_provisioning/about-host-memory-provisioning
|
|
host_memory_provisioning/allocating-host-memory-using-horizon
|
|
host_memory_provisioning/allocating-host-memory-using-the-cli
|
|
|
|
.. _node-interfaces-index:
|
|
|
|
---------------
|
|
Node interfaces
|
|
---------------
|
|
|
|
********************
|
|
Provision interfaces
|
|
********************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/interface-provisioning
|
|
node_interfaces/interface-settings
|
|
node_interfaces/editing-interface-settings
|
|
|
|
*****************
|
|
Create interfaces
|
|
*****************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/creating-interfaces
|
|
|
|
*****************
|
|
Delete interfaces
|
|
*****************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/deleting-or-disabling-interfaces-using-horizon
|
|
node_interfaces/deleting-or-disabling-interfaces-using-the-cli
|
|
|
|
*****************************
|
|
Configure Ethernet interfaces
|
|
*****************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/configuring-ethernet-interfaces-using-horizon
|
|
node_interfaces/attaching-ethernet-interfaces-to-networks-using-the-cli
|
|
|
|
******************************
|
|
Aggregated Ethernet interfaces
|
|
******************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/configuring-aggregated-ethernet-interfaces-using-horizon
|
|
node_interfaces/configuring-aggregated-ethernet-interfaces-using-the-cli
|
|
node_interfaces/changing-a-management-interface-to-aggregated-using-the-cli
|
|
node_interfaces/link-aggregation-settings
|
|
|
|
*************************
|
|
Configure VLAN interfaces
|
|
*************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/configuring-vlan-interfaces-using-horizon
|
|
node_interfaces/configuring-vlan-interfaces-using-the-cli
|
|
|
|
***************************
|
|
PCI-SRIOV interface support
|
|
***************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/provisioning-sr-iov-interfaces-using-the-cli
|
|
node_interfaces/provisioning-sr-iov-vf-interfaces-using-the-cli
|
|
node_interfaces/sriov-port-sharing
|
|
node_interfaces/configuring-ethernet-interfaces-on-sriov-interface-from-horizon
|
|
node_interfaces/configuring-ethernet-interfaces-on-sriov-interface-using-cli
|
|
node_interfaces/configuring-vf-interfaces-rate-limiting-using-cli
|
|
node_interfaces/configuring-vlan-type-interfaces-using-the-sriov-interface-from-the-cli
|
|
|
|
*********************************
|
|
Interface IP address provisioning
|
|
*********************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/interface-ip-address-provisioning-using-the-cli
|
|
|
|
***************
|
|
NIC replacement
|
|
***************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_interfaces/replace-a-nic-with-a-different-vendor-or-device-id-b406c1c190a9
|
|
node_interfaces/nic-replacement-with-the-same-vendor-and-device-id-32942b7b05e5
|
|
|
|
----
|
|
LLDP
|
|
----
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
lldp/lldp-overview
|
|
lldp/viewing-lldp-information-using-horizon
|
|
lldp/viewing-lldp-neighbor-information-using-the-cli
|
|
|
|
---------------------
|
|
Host hardware sensors
|
|
---------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
host_hardware_sensors/relearning-sensor-models
|
|
host_hardware_sensors/adjusting-sensor-actions-and-audit-intervals
|
|
host_hardware_sensors/suppressing-sensor-actions
|
|
host_hardware_sensors/cli-commands-for-managing-sensors
|
|
|
|
---------------------
|
|
Configure node labels
|
|
---------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
configuring_node_labels/configuring-node-labels-using-horizon
|
|
configuring_node_labels/listing-node-labels-from-the-cli
|
|
configuring_node_labels/assigning-node-labels-from-the-cli
|
|
configuring_node_labels/removing-node-labels-from-the-cli
|
|
|
|
----------------------------------------
|
|
Change a worker host performance profile
|
|
----------------------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
changing-a-worker-host-performance-profile
|
|
|
|
----------------------------
|
|
Resize filesystems on a host
|
|
----------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
resizing-filesystems-on-a-host
|
|
|
|
--------------------------
|
|
Customize host life cycles
|
|
--------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
customizing_the_host_life_cycles/adjusting-the-boot-timeout-interval
|
|
customizing_the_host_life_cycles/reboot-limits-for-host-unlock-d9a26854590a
|
|
customizing_the_host_life_cycles/adjusting-the-host-heartbeat-interval-and-heartbeat-response-thresholds
|
|
customizing_the_host_life_cycles/configuring-heartbeat-failure-action
|
|
customizing_the_host_life_cycles/configuring-multi-node-failure-avoidance
|
|
customizing_the_host_life_cycles/handling-maintenance-heartbeat-failure-for-active-controller-service-activation-70fb51663717
|
|
|
|
--------------------
|
|
Node inventory tasks
|
|
--------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
node_inventory_tasks/starting-starlingx
|
|
node_inventory_tasks/shutting-down-starlingx
|
|
|
|
.. _index_hardware-acceleration-devices:
|
|
|
|
-----------------------------
|
|
Hardware acceleration devices
|
|
-----------------------------
|
|
|
|
.. _index-intel-n3000-support:
|
|
|
|
************************
|
|
Intel N3000 FPGA support
|
|
************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
hardware_acceleration_devices/n3000-overview
|
|
hardware_acceleration_devices/updating-an-intel-n3000-fpga-image
|
|
hardware_acceleration_devices/n3000-fpga-forward-error-correction
|
|
hardware_acceleration_devices/showing-details-for-an-fpga-device
|
|
hardware_acceleration_devices/uploading-a-device-image
|
|
hardware_acceleration_devices/common-device-management-tasks
|
|
|
|
|
|
Common device management tasks
|
|
******************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 2
|
|
|
|
hardware_acceleration_devices/listing-uploaded-device-images
|
|
hardware_acceleration_devices/listing-device-labels
|
|
hardware_acceleration_devices/removing-a-device-image
|
|
hardware_acceleration_devices/removing-a-device-label
|
|
hardware_acceleration_devices/initiating-a-device-image-update-for-a-host
|
|
hardware_acceleration_devices/displaying-the-status-of-device-images
|
|
cli-commands-for-managing-pci-devices
|
|
|
|
***********************************************
|
|
vRAN Accelerator Adapters (ACC100/ACC200/N3000)
|
|
***********************************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
hardware_acceleration_devices/enabling-mount-bryce-hw-accelerator-for-hosted-vram-containerized-workloads
|
|
hardware_acceleration_devices/configure-sriov-fec-operator-to-enable-hw-accelerators-for-hosted-vran-containarized-workloads.rst
|
|
hardware_acceleration_devices/set-up-pods-to-use-sriov
|
|
hardware_acceleration_devices/modify-device-driver-4d0435064c4e
|
|
|
|
****************************
|
|
N3000 and ACC100 replacement
|
|
****************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
hardware_acceleration_devices/fec-replacement-with-different-vendor-or-device-id-b1ab1440e15f
|
|
hardware_acceleration_devices/n3000-and-acc100-replacement-with-the-same-vendor-and-device-id-cccabcdc5d43
|
|
|
|
|
|
------------------------
|
|
Host hardware management
|
|
------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
host_hardware_management/changing-hardware-components-for-a-controller-host
|
|
host_hardware_management/changing-hardware-components-for-a-storage-host
|
|
host_hardware_management/changing-hardware-components-for-a-worker-host
|
|
host_hardware_management/configuration-changes-requiring-re-installation
|
|
|
|
|
|
-----------------------------------------
|
|
Node Feature Discovery |prod| Application
|
|
-----------------------------------------
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
install-node-feature-discovery-nfd-starlingx-application-70f6f940bb4a
|
|
uninstall-node-feature-discovery-nfd-starlingx-application-a582bfdadfb8
|
|
|
|
-------------
|
|
Provision BMC
|
|
-------------
|
|
|
|
***************************
|
|
Provision BMC using Horizon
|
|
***************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
provisioning_bmc/provisioning-board-management-control-from-horizon
|
|
provisioning_bmc/deprovisioning-board-management-control-from-horizon
|
|
|
|
***************************
|
|
Provision BMC using the CLI
|
|
***************************
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
provisioning_bmc/provisioning-board-management-control-using-the-cli
|
|
provisioning_bmc/provisioning-bmc-when-adding-a-host
|
|
provisioning_bmc/provisioning-bmc-after-adding-a-host
|
|
provisioning_bmc/deprovisioning-board-management-control-from-the-cli
|
|
|