starlingx/docs
Code Issues Proposed changes
docs/doc/source/datanet/adding-and-maintaining-routes-for-a-vxlan-network.rst
Rafael Jardim d6fb867888 Upstreaming WRO 
Removed duplicate abbrev definitions

Signed-off-by: Rafael Jardim <rafaeljordao.jardim@windriver.com>
Change-Id: I7910d9f54e158250004abd7e17a4e119f8064252
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
2021-03-31 08:57:23 -04:00

1.2 KiB
Raw Blame History

Add and Maintain Routes for a VXLAN Network

You can add or delete routing table entries for hosts on a VXLAN network using the CLI.

The compute node must be locked.

To add routes, use the following command.

~(keystone_admin)]$ system host-route-add <node> <ifname> <network> <prefix> <gateway> <metric>

where

node

is the name or UUID of the compute node

ifname

is the name of the interface

network

is an IPv4 or IPv6 network address

prefix

is the netmask length for the network address

gateway

is the default gateway

metric

is the cost of the route (the number of hops)

To delete routes, use the following command.

~(keystone_admin)]$ system host-route-delete <uuid> <ifname> <network> <prefix> <gateway> <metric>

where uuid is the UUID of the route to be deleted.

To list existing routes, including their UUIDs, use the following command.

~(keystone_admin)]$ system host-route-list compute-0