starlingx/docs
Code Issues Proposed changes
docs/doc/source/updates/kubernetes/configuring-kubernetes-multi-version-upgrade-orchestration-aio-b0b59a346466.rst
Juanita Balaraj 28b9646616 Updated NetApp Trident Version for Kubernetes 
Story: 2011080
Task: 50696

Change-Id: I0e816a2894c325d2b735eb879880b48ee23abc79
Signed-off-by: Juanita Balaraj <juanita.balaraj@windriver.com>
2024-07-29 19:57:25 +00:00

360 lines
15 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. _configuring-kubernetes-multi-version-upgrade-orchestration-aio-b0b59a346466:
=========================================================================
Configure Kubernetes Multi-Version Upgrade Cloud Orchestration for AIO-SX
=========================================================================
You can configure Kubernetes multi-version upgrade orchestration strategy using
the :command:`sw-manager` command. This feature is enabled from
|prod| |k8s-multi-ver-orch-strategy-release| and is supported only for the |AIO-SX| system.
.. note::
You require administrator privileges to use the :command:`sw-manager` command.
You must log in to the active controller as **user sysadmin** and source the script
by using the :command:`source /etc/platform/openrc` command to obtain administrator
privileges. Do not use :command:`sudo`.
.. note::
Management-affecting alarms cannot be ignored using relaxed alarm rules
during an orchestrated Kubernetes version upgrade operation. For a list of
management-affecting alarms, see |fault-doc|: :ref:`100-series-alarm-messages-starlingx`.
To display management-affecting active alarms, use the :command:`fm alarm-list --mgmt_affecting`
command.
During an orchestrated Kubernetes version upgrade operation, the following
alarms are ignored even when the default strict restrictions are selected:
.. _noc1590162360081-ul-vhg-jxs-tlb:
- 100.103: Memory threshold exceeded
- 200.001: Locked host
- 280.001: Subcloud resource off-line
- 280.002: Subcloud resource out-of-sync
- 700.004: |VM| stopped
- 750.006: Configuration change requires reapply of cert-manager
- 900.001: Patch in progress
- 900.007: Kube upgrade in progress
- 900.401: kube-upgrade-auto-apply-inprogress
You can use ``help`` for the overall commands and also for each sub-command.
For example:
.. code-block:: none
~(keystone_admin)$ sw-manager kube-upgrade-strategy –help
usage: sw-manager kube-upgrade-strategy [-h] ...
optional arguments:
-h, --help show this help message and exit
Kubernetes Update Commands:
create Create a strategy
delete Delete a strategy
apply Apply a strategy
abort Abort a strategy
show Show a strategy
.. rubric:: |prereq|
.. _noc1590162360081-ul-ls2-pxs-tlb:
- Hosts that need to be upgraded must be in the **unlocked-enabled** state.
- If you are using NetApp Trident, ensure that your NetApp version is
compatible with Trident 24.02 before upgrading Kubernetes to version
|kube-ver| and after updating |prod| to version |prod-ver|. For more
information, see :ref:`upgrade-the-netapp-trident-software-c5ec64d213d3`.
.. only:: partner
.. include:: /_includes/configuring-kubernetes-update-orchestration.rest
.. rubric:: |proc|
#. List available upgrades, for example:
.. code-block:: none
~(keystone_admin)$ system kube-version-list
+-----------------+--------+-------------+
| Version | Target | State |
+-----------------+--------+-------------+
| v1.21.8 | True | active |
| v1.22.5 | False | available |
| v1.23.1 | False | available |
| v1.24.4 | False | available |
+-----------------+--------+-------------+
#. Confirm that the system is healthy.
Check the current system health status, resolve any alarms and other issues
reported by the :command:`system health-query-kube-upgrade` command. Then,
recheck the system health status to confirm that all **System Health**
fields are set to **OK**.
By default, the upgrade process cannot be run and is not recommended to be
run with active alarms present. Use the :command:`system kube-upgrade-start --force`
command to force the upgrade process to start and ignore non-management-affecting
alarms.
.. note::
It is strongly recommended that you clear your system of all alarms
before doing an upgrade. While the :command:`--force` option is
available to run the upgrade, it is a best practice to clear any
alarms.
.. code-block:: none
~(keystone_admin)]$ system health-query-kube-upgrade
System Health:
All hosts are provisioned: [OK]
All hosts are unlocked/enabled: [OK]
All hosts have current configurations: [OK]
All hosts are patch current: [OK]
No alarms: [OK]
All kubernetes nodes are ready: [OK]
All kubernetes control plane pods are ready: [OK]
All kubernetes applications are in a valid state: [OK]
#. Create the strategy.
The Kubernetes multi-version upgrade orchestration strategy :command:`create`
command creates a series of stages with steps that apply the Kubernetes
version upgrade.
Specify the desired Kubernetes version in ``--to-version``
(usually the highest version available in the system).
.. code-block:: none
~(keystone_admin)$ sw-manager kube-upgrade-strategy create --to-version v1.24.4
Strategy Kubernetes Upgrade Strategy:
strategy-uuid: f03f5944-ee79-4047-8d2e-68bfa6775210
controller-apply-type: serial
storage-apply-type: serial
worker-apply-type: serial
default-instance-action: stop-start
alarm-restrictions: strict
current-phase: build
current-phase-completion: 0%
state: building
inprogress: true
where:
``--to-version``
The version of Kubernetes to upgrade to, for example, ``v1.24.4``.
This argument is required.
``--controller-apply-type`` and ``--storage-apply-type``
These options cannot be changed from ``serial`` because Kubernetes
upgrade concurrency is only supported for worker hosts.
.. note::
Setting the Kubernetes version upgrade apply type is supported only
for hosts with the worker function. Any attempt to modify the
controller or storage apply type will be rejected.
``--worker-apply-type``
This option specifies the host concurrency of the Kubernetes version
upgrade strategy:
- serial (default): worker hosts will be patched one at a time
- parallel: worker hosts will be upgraded in parallel
- At most, ``parallel`` will be upgraded at the same time
- At most, half of the hosts in a host aggregate will be upgraded
at the same time
- ignore: worker hosts will not be upgraded; strategy create will fail
Worker hosts with no instances are upgraded before worker hosts with
instances.
``--max-parallel-worker-hosts``
This option applies to the parallel worker apply type selection to
specify the maximum worker hosts to upgrade in parallel (minimum: 2, maximum: 10).
``--alarm-restrictions``
This option sets how the Kubernetes version upgrade orchestration
behaves when alarms are present.
To display management-affecting active alarms, use the :command:`fm alarm-list --mgmt_affecting` command.
``strict`` (default)
The default strict option will result in the failure of patch orchestration if
there are any alarms present in the system (except for a small list of alarms).
``relaxed``
This option allows orchestration to proceed even if alarms are present, as
long as none of these alarms are management affecting.
.. code-block:: none
~(keystone_admin)]$ sw-manager kube-upgrade-strategy create --help
usage:sw-manager kube-upgrade-strategy [-h]
--to-version <kubernetesVersion>
[--controller-apply-type {ignore}]
[--storage-apply-type {ignore}]
[--worker-apply-type
{serial,parallel,ignore}]
[--max-parallel-worker-hosts
{2,3,4,5,6,7,8,9,10}]
[--instance-action {migrate,stop-start}]
[--alarm-restrictions {strict,relaxed}]
optional arguments:
-h, --help show this help message and exit
--controller-apply-type {serial,ignore}
defaults to serial
--storage-apply-type {serial,ignore}
defaults to serial
--worker-apply-type {serial,parallel,ignore}
defaults to serial
--max-parallel-worker-hosts {2,3,4,5,6,7,8,9,10}
maximum worker hosts to update in parallel
--instance-action {migrate,stop-start}
defaults to stop-start
--alarm-restrictions {strict,relaxed}
defaults to strict
#. |optional| Display the strategy in summary, if required. The Kubernetes
upgrade strategy :command:`show` command displays the strategy in a summary.
.. code-block:: none
~(keystone_admin)$ sw-manager kube-upgrade-strategy show
Strategy Kubernetes Upgrade Strategy:
strategy-uuid: f03f5944-ee79-4047-8d2e-68bfa6775210
controller-apply-type: serial
storage-apply-type: serial
worker-apply-type: serial
default-instance-action: stop-start
alarm-restrictions: strict
current-phase: build
current-phase-completion: 100%
state: ready-to-apply
build-result: success
build-reason:
The :command:`show` strategy subcommand displays a summary of the current
state of the strategy. A complete view of the strategy can be shown using
the ``--details`` option.
The strategy steps and stages are displayed using the ``--details`` option.
#. Apply the strategy.
Kubernetes multi-version upgrade orchestration strategy :command:`apply` command
runs the strategy stages and steps consecutively until the Kubernetes
upgrade on all the hosts in the strategy is completed.
- Use the ``-stage-id`` option to specify a specific stage to apply one
at a time.
.. note::
When applying a single stage, only the next stage will be applied.
You cannot skip stages.
.. code-block:: none
~(keystone_admin)$ sw-manager kube-upgrade-strategy apply
Strategy Kubernetes upgrade Strategy:
strategy-uuid: f03f5944-ee79-4047-8d2e-68bfa6775210
controller-apply-type: serial
storage-apply-type: serial
worker-apply-type: serial
default-instance-action: stop-start
alarm-restrictions: strict
current-phase: apply
current-phase-completion: 0%
state: applying
inprogress: true
- Use the :command:`kube-upgrade-show` command to monitor Kubernetes
upgrade state and percentage completion.
.. code-block:: none
~(keystone_admin)$ system kube-upgrade-show
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| uuid | 1272e9cc-1a15-4a53-bb5a-d47494729068 |
| from_version | v1.21.8 |
| to_version | v1.24.4 |
| state | downloading-images |
| created_at | 2023-09-25T18:32:10.820488+00:00 |
| updated_at | 2023-09-25T18:32:10.885709+00:00 |
+--------------+--------------------------------------+
You will see the ``state`` property transition through values, such as
``downloading-images``, ``downloaded-images``, ``upgraded-networking``,
and ``upgraded-first-master``.
#. |optional| Abort the strategy, if required. This is only used to stop and
abort the entire strategy.
The Kubernetes version upgrade strategy :command:`abort` command can be
used to abort the Kubernetes version upgrade strategy after the current
step of the currently applying stage is completed.
#. Confirm that the upgrade has completed successfully.
.. code-block:: none
~(keystone_admin)$ system kube-upgrade-show
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| uuid | 1272e9cc-1a15-4a53-bb5a-d47494729068 |
| from_version | v1.21.8 |
| to_version | v1.24.4 |
| state | upgrade-complete |
| created_at | 2023-09-25T18:52:10.885709+00:00 |
| updated_at | 2023-09-25T18:52:11.673259+00:00 |
+--------------+--------------------------------------+
~(keystone_admin)$ system kube-version-list
+-----------------+--------+-------------+
| Version | Target | State |
+-----------------+--------+-------------+
| v1.21.8 | False | unavailable |
| v1.22.5 | False | unavailable |
| v1.23.1 | False | unavailable |
| v1.24.4 | True | active |
+-----------------+--------+-------------+
#. Delete the strategy.
.. note::
After the Kubernetes multi-version upgrade orchestration strategy has been
applied (or aborted), it must be deleted before another Kubernetes
version upgrade strategy can be created. If a Kubernetes version
upgrade strategy application fails, you must address the issue that
caused the failure, then delete and re-create the strategy before
attempting to apply it again.
.. code-block:: none
~(keystone_admin)$ sw-manager kube-upgrade-strategy delete
Strategy deleted.
View Git Blame Copy Permalink