Select the clock matching requirements
Fix clock selection algorithm behavior where a clock source starts to match requirements but is not selected because it has the same ha_priority than active. In a HA configuration with two or more clocks configured with equal ha_priority if no clock source matches the requirements the first one in the configuration file is selected active. This is a standard behavior to always have a clock source, even when they are not synchronized. When one of the clock sources starts to match the requirements it must be selected active, regardless of the priority. But when a second clock source starts to match the requirements and has the same ha_priority as the active, the active remains the clock source. There is no need to switch active when they have equal ha_priority. Test plan: two sources with the same priority PASS: Verify a clock source is selected active when it starts to match the requirements and the current active doesn't match them, even if they have equal ha_priority. PASS: Verify a clock source isn't selected active when it starts to match the requirements and the current active also matches them. Regression: two sources with different priority PASS: Verify a clock source is selected active when it starts to match the requirements and the current active doesn't match them, even if their ha_priority is lower than the actives. PASS: Verify a clock source is selected active when it starts to match the requirements and the current active also matches them but has lower ha_priority configured. PASS: Verify a clock source isn't selected active when it starts to match the requirements and the current active also matches them and has higher ha_priority configured. Story: 2010723 Task: 48699 Change-Id: If80532b7b8febcc164f7c748a8d4122b4f10fd3b Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
This commit is contained in:
parent
59b3912596
commit
4a94f788a4
@ -1,7 +1,7 @@
|
||||
From 63b43924294da6cb177d0509120b2e957580441c Mon Sep 17 00:00:00 2001
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Mon, 31 May 2021 11:07:52 +0200
|
||||
Subject: [PATCH 1/49] clock: Reset state when switching port with same best clock.
|
||||
Subject: [PATCH 1/50] clock: Reset state when switching port with same best clock.
|
||||
|
||||
When the best port is changed, but the ID of the best clock doesn't
|
||||
change (e.g. a passive port is activated on link failure), reset the
|
||||
@ -12,6 +12,7 @@ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit 7e8eba5332671abfd95d06dd191059eded1d2cca upstream]
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
clock.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
@ -4,7 +4,7 @@ In-Reply-To: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerv
|
||||
References: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerville@windriver.com>
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Mon, 31 May 2021 11:07:53 +0200
|
||||
Subject: [PATCH 2/49] clock: Reset clock check on best clock/port change.
|
||||
Subject: [PATCH 2/50] clock: Reset clock check on best clock/port change.
|
||||
|
||||
Reset the clock check when the best clock or port changes, together with
|
||||
the other state like current estimated delay and frequency. This avoids
|
||||
@ -15,6 +15,7 @@ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit 262a49b07eaccc0f0237e3cd4df01b185b8f664f upstream]
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
clock.c | 2 ++
|
||||
clockcheck.c | 9 ++++++++-
|
||||
|
@ -4,7 +4,7 @@ In-Reply-To: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerv
|
||||
References: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerville@windriver.com>
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Mon, 31 May 2021 11:07:54 +0200
|
||||
Subject: [PATCH 3/49] port: Don't check timestamps from non-slave ports.
|
||||
Subject: [PATCH 3/50] port: Don't check timestamps from non-slave ports.
|
||||
|
||||
Don't perform the sanity check on receive timestamps from ports in
|
||||
non-slave states to avoid false positives in the jbod mode, where
|
||||
@ -14,6 +14,7 @@ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit e117e37e379556fa23337db2518bb44d8793e039 upstream]
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
port.c | 5 ++++-
|
||||
1 file changed, 4 insertions(+), 1 deletion(-)
|
||||
|
@ -4,7 +4,7 @@ In-Reply-To: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerv
|
||||
References: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerville@windriver.com>
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Mon, 31 May 2021 11:07:55 +0200
|
||||
Subject: [PATCH 4/49] port: Don't renew raw transport.
|
||||
Subject: [PATCH 4/50] port: Don't renew raw transport.
|
||||
|
||||
Renewing of the transport on announce/sync timeout is needed in the
|
||||
client-only mode to avoid getting stuck with a broken multicast socket
|
||||
@ -19,6 +19,7 @@ Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
||||
[commit 6df84259647757bc53818a039734f8ff85618c02 upstream]
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
port.c | 6 ++++++
|
||||
1 file changed, 6 insertions(+)
|
||||
|
@ -4,7 +4,7 @@ In-Reply-To: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630611367.git.Jim.Somerv
|
||||
References: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630611367.git.Jim.Somerville@windriver.com>
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Mon, 31 May 2021 11:07:56 +0200
|
||||
Subject: [PATCH 5/49] clockcheck: Increase minimum interval.
|
||||
Subject: [PATCH 5/50] clockcheck: Increase minimum interval.
|
||||
|
||||
Increase the minimum check interval to 1 second to measure the frequency
|
||||
offset more accurately and with default configuration make false
|
||||
@ -14,6 +14,7 @@ Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
||||
[commit a082bcd700e4955ebaa00d7039bf4bce92048ac4 upstream]
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
clockcheck.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
@ -4,7 +4,7 @@ In-Reply-To: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerv
|
||||
References: <0389752e3aecf8d2b2743f16ce1408a58088bea9.1630418391.git.Jim.Somerville@windriver.com>
|
||||
From: Cole Walker <cole.walker@windriver.com>
|
||||
Date: Wed, 23 Jun 2021 11:14:41 -0400
|
||||
Subject: [PATCH 6/49] Add option to disable default port selection in phc2sys
|
||||
Subject: [PATCH 6/50] Add option to disable default port selection in phc2sys
|
||||
|
||||
This change serves to address an issue in phc2sys
|
||||
where the local ptp clocks are not synced together properly if the local
|
||||
@ -31,6 +31,7 @@ but can be configured by users via
|
||||
system service-parameter-add ptp global default_sync=0
|
||||
|
||||
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
config.c | 1 +
|
||||
phc2sys.c | 15 ++++++++++++---
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 6428c2628c013c408ec09355ad37eb12fa6bb20f Mon Sep 17 00:00:00 2001
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Wed, 18 May 2022 11:33:35 +0200
|
||||
Subject: [PATCH 7/49] sysoff: Change sysoff_measure() to return errno.
|
||||
Subject: [PATCH 7/50] sysoff: Change sysoff_measure() to return errno.
|
||||
|
||||
Return -errno from failed ioctl instead of the SYSOFF_* enum from the
|
||||
measurement functions to allow the callers to check for specific errors.
|
||||
@ -9,6 +9,7 @@ measurement functions to allow the callers to check for specific errors.
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit 7824b13db9533ddebe37cf444d7aaa5d235575d3 upstream]
|
||||
Signed-off-by: Douglas Henrique Koerich <douglashenrique.koerich@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
sysoff.c | 15 ++++++++-------
|
||||
sysoff.h | 2 +-
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 38a530d94fc5aa73bde424d05e2e38348e64d7e5 Mon Sep 17 00:00:00 2001
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Wed, 18 May 2022 11:33:36 +0200
|
||||
Subject: [PATCH 8/49] sysoff: Change log level of ioctl error messages.
|
||||
Subject: [PATCH 8/50] sysoff: Change log level of ioctl error messages.
|
||||
|
||||
Change the log level of ioctl error messages to the error level to make
|
||||
them visible in default configuration, with the exception of EOPNOTSUPP
|
||||
@ -11,6 +11,7 @@ confusing users.
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit 270709323a161ff1cb83af511ce50691152c75cf upstream]
|
||||
Signed-off-by: Douglas Henrique Koerich <douglashenrique.koerich@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
sysoff.c | 14 +++++++++++---
|
||||
1 file changed, 11 insertions(+), 3 deletions(-)
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 11ae077e31d9957df01aacfa17eea5b5d548b249 Mon Sep 17 00:00:00 2001
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Wed, 18 May 2022 11:33:37 +0200
|
||||
Subject: [PATCH 9/49] sysoff: Retry on EBUSY when probing supported ioctls.
|
||||
Subject: [PATCH 9/50] sysoff: Retry on EBUSY when probing supported ioctls.
|
||||
|
||||
Handle EBUSY when probing support for a PTP_SYS_OFFSET ioctl. Try each
|
||||
ioctl up to three times before giving up on it to make the detection
|
||||
@ -10,6 +10,7 @@ more reliable.
|
||||
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
[commit dadd2593c7beaee9eba5828a7bd8a0b5849dd8bb upstream]
|
||||
Signed-off-by: Douglas Henrique Koerich <douglashenrique.koerich@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
sysoff.c | 14 ++++++++++----
|
||||
1 file changed, 10 insertions(+), 4 deletions(-)
|
||||
|
@ -1,7 +1,7 @@
|
||||
From e4fd6a930213e6f0f009eb070d51b1e14db60d1b Mon Sep 17 00:00:00 2001
|
||||
From: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
Date: Wed, 18 May 2022 11:33:38 +0200
|
||||
Subject: [PATCH 10/49] phc2sys: Don't exit when reading of PHC fails with EBUSY.
|
||||
Subject: [PATCH 10/50] phc2sys: Don't exit when reading of PHC fails with EBUSY.
|
||||
|
||||
Reading of the PHC can occasionally fail with some drivers, e.g. the ice
|
||||
driver returns EBUSY when it fails to get a lock. Continue in the loop
|
||||
@ -15,6 +15,7 @@ Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
|
||||
ahead of baseline currently used by StarlingX ]
|
||||
|
||||
Signed-off-by: Douglas Henrique Koerich <douglashenrique.koerich@windriver.com>
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
phc2sys.c | 31 +++++++++++++++++++------------
|
||||
1 file changed, 19 insertions(+), 12 deletions(-)
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 0c5c39a8cd3675d91e872a75d75854907950957d Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 13:47:47 -0300
|
||||
Subject: [PATCH 11/49] phc2sys: extract PMC functionality into a smaller
|
||||
Subject: [PATCH 11/50] phc2sys: extract PMC functionality into a smaller
|
||||
struct pmc_node
|
||||
|
||||
This creates a smaller structure within phc2sys_private, which embeds
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 87d8e7281e3e66813d0c669bea0b5335a8cbb6b6 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 13:59:48 -0300
|
||||
Subject: [PATCH 12/49] phc2sys: make PMC functions non-static
|
||||
Subject: [PATCH 12/50] phc2sys: make PMC functions non-static
|
||||
|
||||
In preparation of a trivial movement of code to pmc_common.c, remove the
|
||||
"static" keyword from the functions that will end up there, since they
|
||||
|
@ -1,7 +1,7 @@
|
||||
From ba9c2ea0e1f7a96093bca1147d4745a7d0ce17b6 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:34:19 -0300
|
||||
Subject: [PATCH 13/49] phc2sys: break out pmc code into pmc_common.c
|
||||
Subject: [PATCH 13/50] phc2sys: break out pmc code into pmc_common.c
|
||||
|
||||
The code through which phc2sys sends various PTP management messages to
|
||||
ptp4l via pmc can be reused.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c00e75286b2ad882cf8e89549ea58e438c877f95 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:40:59 -0300
|
||||
Subject: [PATCH 14/49] Introduce the PMC agent module.
|
||||
Subject: [PATCH 14/50] Introduce the PMC agent module.
|
||||
|
||||
The logic for placing PTP management queries migrated out of phc2sys into
|
||||
pmc_common in order to be shared with other programs in the future. This
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 82258917b8de7110545f3d4f99d3ac88a609f019 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:47:36 -0300
|
||||
Subject: [PATCH 15/49] pmc_agent: Rename pmc_node to something more
|
||||
Subject: [PATCH 15/50] pmc_agent: Rename pmc_node to something more
|
||||
descriptive.
|
||||
|
||||
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
|
||||
|
@ -1,7 +1,7 @@
|
||||
From f6d7bb0a62f15fcca0343c42891f7e056f502949 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:55:29 -0300
|
||||
Subject: [PATCH 16/49] pmc_agent: Hide the implementation.
|
||||
Subject: [PATCH 16/50] pmc_agent: Hide the implementation.
|
||||
|
||||
The PMC agent's implementation should not be exposed to its users. This
|
||||
patch hides the details and provides a method to create an instance. In
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 4ebb69f5c55e7f1f08d1a73df87d42fe70147ec9 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:58:09 -0300
|
||||
Subject: [PATCH 17/49] Find a better home for the management TLV ID helper
|
||||
Subject: [PATCH 17/50] Find a better home for the management TLV ID helper
|
||||
function.
|
||||
|
||||
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 6e4f8ea8531b7678a44a9b3ed021fda94eccdc27 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 14:59:57 -0300
|
||||
Subject: [PATCH 18/49] Find a better home for the management TLV data helper
|
||||
Subject: [PATCH 18/50] Find a better home for the management TLV data helper
|
||||
function.
|
||||
|
||||
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 95e4983c9ab517b9dda1faf171721f0dd877e076 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:04:11 -0300
|
||||
Subject: [PATCH 19/49] Introduce error codes for the run_pmc method.
|
||||
Subject: [PATCH 19/50] Introduce error codes for the run_pmc method.
|
||||
|
||||
The run_pmc function is used by several of the PMC agent methods, but it
|
||||
breaks the pattern of returning zero on success. However, the user facing
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 8c1dd261683d27acba49e047d9f6da52dada3c98 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:08:01 -0300
|
||||
Subject: [PATCH 20/49] pmc_agent: Convert the subscribe method into the
|
||||
Subject: [PATCH 20/50] pmc_agent: Convert the subscribe method into the
|
||||
canonical form.
|
||||
|
||||
This patch renames the function to have the module prefix and corrects the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 82a369b4fe44a7cea41fb0ccf408c02b1b6aa694 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:17:26 -0300
|
||||
Subject: [PATCH 21/49] pmc_agent: Simplify the update method.
|
||||
Subject: [PATCH 21/50] pmc_agent: Simplify the update method.
|
||||
|
||||
The main method that causes the PMC agent to update its status takes a flag
|
||||
that results in different behavior when push notifications are active.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 731e8938953e56578007a679dbaa29e9471650ac Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:18:36 -0300
|
||||
Subject: [PATCH 22/49] pmc_agent: Simplify logic in update method.
|
||||
Subject: [PATCH 22/50] pmc_agent: Simplify logic in update method.
|
||||
|
||||
If the pmc pointer is not set, then there is no need to read the time only
|
||||
to later discard the result. This patch simplifies the flow by returning
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 357e24c897e1e2d29cf011b3a38c3a6b2a7943c3 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:33:43 -0300
|
||||
Subject: [PATCH 23/49] pmc_agent: Remove bogus comparison between last update
|
||||
Subject: [PATCH 23/50] pmc_agent: Remove bogus comparison between last update
|
||||
and now.
|
||||
|
||||
The monotonic clock can never go backwards. If you take T1 and later T2
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d5421e4d4d86907648a59810ab9c27e739591971 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:35:23 -0300
|
||||
Subject: [PATCH 24/49] pmc_agent: Perform time comparison using positive
|
||||
Subject: [PATCH 24/50] pmc_agent: Perform time comparison using positive
|
||||
logic.
|
||||
|
||||
In the update_pmc_node() method, reduce the expression
|
||||
|
@ -1,7 +1,7 @@
|
||||
From a304d4df86a76c187fc7074755fe9b5ad349efbe Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:36:38 -0300
|
||||
Subject: [PATCH 25/49] pmc_agent: Rename the update method and attempt to
|
||||
Subject: [PATCH 25/50] pmc_agent: Rename the update method and attempt to
|
||||
document it.
|
||||
|
||||
This patch renames the function to have the module prefix and tries to
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 5aacbe319db97907a15741005e2790bbf4c742a0 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 15:37:46 -0300
|
||||
Subject: [PATCH 26/49] phc2sys: Fix null pointer de-reference in manual mode.
|
||||
Subject: [PATCH 26/50] phc2sys: Fix null pointer de-reference in manual mode.
|
||||
|
||||
If both the -w and -O command line options are specified (or when
|
||||
using -w when both source and destination clocks are PHCs), then
|
||||
|
@ -1,7 +1,7 @@
|
||||
From b8188a4fd51bc8983e5d19f18fe37b8ca39d03a6 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:20:04 -0300
|
||||
Subject: [PATCH 27/49] pmc_agent: Convert the method that queries TAI-UTC
|
||||
Subject: [PATCH 27/50] pmc_agent: Convert the method that queries TAI-UTC
|
||||
offset into the canonical form.
|
||||
|
||||
This patch renames the function to have the module prefix and corrects the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From acdf74df9fa69b81c1e9332f10d4efcd3e9bae48 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:23:29 -0300
|
||||
Subject: [PATCH 28/49] pmc_agent: Convert the method that queries the port
|
||||
Subject: [PATCH 28/50] pmc_agent: Convert the method that queries the port
|
||||
properties.
|
||||
|
||||
Prefix the function with the module name and correct the return code
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 3e6dd047083625ca03df9b4bbdc781e7dd079ff2 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:29:30 -0300
|
||||
Subject: [PATCH 29/49] pmc_agent: Generalize the method that queries the local
|
||||
Subject: [PATCH 29/50] pmc_agent: Generalize the method that queries the local
|
||||
clock identity.
|
||||
|
||||
When started in automatic mode, the phc2sys program first queries the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From d3b877cae9576beddb00d4c5db67bf49c944b222 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:30:57 -0300
|
||||
Subject: [PATCH 30/49] pmc_agent: Simplify the method that gets of the number
|
||||
Subject: [PATCH 30/50] pmc_agent: Simplify the method that gets of the number
|
||||
of local ports.
|
||||
|
||||
The number of ports is already available in the cached default data
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 156728d14591dd2b3131bcff49959e806523c1bb Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:32:27 -0300
|
||||
Subject: [PATCH 31/49] pmc_agent: Let the update method poll for push events.
|
||||
Subject: [PATCH 31/50] pmc_agent: Let the update method poll for push events.
|
||||
|
||||
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 0e504e57af6c576202bbe1abe5a99eb24a981b73 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:51:10 -0300
|
||||
Subject: [PATCH 32/49] phc2sys: Fix regression in the automatic mode.
|
||||
Subject: [PATCH 32/50] phc2sys: Fix regression in the automatic mode.
|
||||
|
||||
Commit ac7d69bbc476 ("pmc_agent: Convert the method that queries the
|
||||
port properties.") had the well meant intention of the cleaning up the
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 06a6734e3350e4020b4bb7b24a15d43aa42b4ca7 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 17:57:11 -0300
|
||||
Subject: [PATCH 33/49] Implement push notification for TIME_STATUS_NP
|
||||
Subject: [PATCH 33/50] Implement push notification for TIME_STATUS_NP
|
||||
|
||||
Subscribers to NOTIFY_TIME_SYNC will be notified on every clock
|
||||
synchronization.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From babbe47ab091071e16fcd527bf1aad06e5aec377 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 18:16:31 -0300
|
||||
Subject: [PATCH 34/49] clock: Rename UDS variables to read-write.
|
||||
Subject: [PATCH 34/50] clock: Rename UDS variables to read-write.
|
||||
|
||||
In preparation for a new read-only UDS port, rename variables of the
|
||||
current UDS port to make it clear it is read-write, as opposed to
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 4af24949b94eda84b4b74d77b9164cf3fe0eccf9 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 18:18:29 -0300
|
||||
Subject: [PATCH 35/49] clock: Add read-only UDS port for monitoring.
|
||||
Subject: [PATCH 35/50] clock: Add read-only UDS port for monitoring.
|
||||
|
||||
Add a second UDS port to allow untrusted applications to monitor ptp4l.
|
||||
On this "read-only" UDS port disable non-GET actions and forwarding.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 019f50868bc4300c591025d364898035ea9817b9 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 12 Jun 2023 18:20:50 -0300
|
||||
Subject: [PATCH 36/49] Rename management ID macros.
|
||||
Subject: [PATCH 36/50] Rename management ID macros.
|
||||
|
||||
The management ID macros are prefixed with TLV. This is confusing,
|
||||
because the true TLV tags have the same prefix. Make the code more
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 2a6ddfe1b9700ce8e0c62da8a7a4f2edcd4e1cad Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Sun, 18 Jun 2023 20:58:34 -0300
|
||||
Subject: [PATCH 37/49] Enhance phc2sys to accept multiple ptp4l inputs
|
||||
Subject: [PATCH 37/50] Enhance phc2sys to accept multiple ptp4l inputs
|
||||
|
||||
A new configuration option called ha_enabled was created. When it is set 1
|
||||
multiple ptp4l inputs are accepted and the high availability algorithms
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 142b30b1f996a5bd48f0edc9b5fb0f51af0b97fd Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Tue, 4 Jul 2023 17:27:50 -0300
|
||||
Subject: [PATCH 38/49] Best source selection algorithm
|
||||
Subject: [PATCH 38/50] Best source selection algorithm
|
||||
|
||||
An algorithm to select the best available clock and use it
|
||||
as clock source.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c61a91f5da1c07a783b0922e713c9f1d32adfa80 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Sat, 8 Jul 2023 19:02:50 -0300
|
||||
Subject: [PATCH 39/49] Select best source clock after state changes
|
||||
Subject: [PATCH 39/50] Select best source clock after state changes
|
||||
|
||||
During operation, the clock states might change and require a new clock
|
||||
to be selected. For example, the local clock class of the current active
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 7d5061d971a8abc2ba8443edccde38e9a7a6f0ce Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Wed, 26 Jul 2023 15:08:15 -0300
|
||||
Subject: [PATCH 40/49] Forced lock a clock source in configuration
|
||||
Subject: [PATCH 40/50] Forced lock a clock source in configuration
|
||||
|
||||
To help on maintenance and debuging tasks was implemented a configuration
|
||||
to forced lock to a single clock. It disables the automatic clock
|
||||
|
@ -1,7 +1,7 @@
|
||||
From fce993dd36e481aace337a62ff81331cd2411bec Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Thu, 27 Jul 2023 14:22:47 -0300
|
||||
Subject: [PATCH 41/49] HA phc2sys com socket
|
||||
Subject: [PATCH 41/50] HA phc2sys com socket
|
||||
|
||||
A new communication path was created to retrieve status and to control
|
||||
the high availability algorithm.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From e77783a9873baeeda277cfa59059021ce121a693 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Fri, 4 Aug 2023 15:44:12 -0300
|
||||
Subject: [PATCH 42/49] Commands 'enable lock' and 'disable lock.
|
||||
Subject: [PATCH 42/50] Commands 'enable lock' and 'disable lock.
|
||||
|
||||
The 'enable lock' command is used to lock to a single clock
|
||||
source and disable the HA clock selection algorithm. The
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 27b5c6afff470053b30ade14537be43f1c1c376d Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Fri, 4 Aug 2023 19:01:57 -0300
|
||||
Subject: [PATCH 43/49] Commands 'enable source' and 'disable source'.
|
||||
Subject: [PATCH 43/50] Commands 'enable source' and 'disable source'.
|
||||
|
||||
These commands controls the list of clocks available to clock
|
||||
selection algorithm.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 2d40cc7cf52bbf054856c34902e4bda9f13ebb79 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 7 Aug 2023 14:55:12 -0300
|
||||
Subject: [PATCH 44/49] Stream type phc2sys com socket
|
||||
Subject: [PATCH 44/50] Stream type phc2sys com socket
|
||||
|
||||
The type of the socket was changed from datagram to stream.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 2896553d6dfa975102cba4cc45105b000ec0ae52 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Tue, 8 Aug 2023 13:10:50 -0300
|
||||
Subject: [PATCH 45/49] Functions starts_with and str_at_column
|
||||
Subject: [PATCH 45/50] Functions starts_with and str_at_column
|
||||
|
||||
Renaming starts_with and str_at_column functions to match ptp4l code
|
||||
style.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From f480fb54182da36baeb35bac90154abafcaf854a Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Tue, 8 Aug 2023 14:06:55 -0300
|
||||
Subject: [PATCH 46/49] Robustness improvements to phc2sys socket
|
||||
Subject: [PATCH 46/50] Robustness improvements to phc2sys socket
|
||||
|
||||
When phc2sys abnormally exits the socket file might remain created.
|
||||
To avoid error when phc2sys is relaunched, the exixting file is
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c5e1599748877f16bfd1dea6910f6b8b57be7ddd Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 7 Aug 2023 18:19:37 -0300
|
||||
Subject: [PATCH 47/49] phc2sys without -w option.
|
||||
Subject: [PATCH 47/50] phc2sys without -w option.
|
||||
|
||||
Fix bad clock and pmc initialization when -w command argument
|
||||
is not provided.
|
||||
|
@ -1,7 +1,7 @@
|
||||
From c9a2a5398bace2f000ecc5ae6185b331cefa3a2c Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Mon, 21 Aug 2023 14:28:20 -0300
|
||||
Subject: [PATCH 48/49] HA domain number
|
||||
Subject: [PATCH 48/50] HA domain number
|
||||
|
||||
Support multiple domain numbers for each uds socket used in HA phc2sys.
|
||||
|
||||
|
@ -1,7 +1,7 @@
|
||||
From 52c6fd7f9212902a2c5195e5a7b2c19a5956633f Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Wed, 23 Aug 2023 19:18:08 -0300
|
||||
Subject: [PATCH 49/49] GM clock accuracy and offset scaled log variance
|
||||
Subject: [PATCH 49/50] GM clock accuracy and offset scaled log variance
|
||||
|
||||
Include GM clock quality parameters clock accuracy and offset
|
||||
scaled log variance to the clock selection algorithm. Those
|
||||
|
@ -0,0 +1,80 @@
|
||||
From 2155ccb5a4de8cbebb552cf3d0a23874b026a716 Mon Sep 17 00:00:00 2001
|
||||
From: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
Date: Tue, 29 Aug 2023 19:06:23 -0300
|
||||
Subject: [PATCH 50/50] Select matching requirements clock if active doesn't match
|
||||
them
|
||||
|
||||
Fix clock selection algorithm behavior where a clock source starts
|
||||
to match requirements but is not selected because it has the same
|
||||
ha_priority than active.
|
||||
|
||||
In a HA configuration with two or more clocks configured with equal
|
||||
ha_priority if no clock source match the requirements the first one in
|
||||
the configuration file is selected active. This is a standard behavior
|
||||
to always have a clock source, even when they are not synchronized.
|
||||
|
||||
And when one of the clock source starts to match the requirements it
|
||||
must be selected active, regardless the priority.
|
||||
|
||||
But when a second clock source starts to match the requirements and
|
||||
has the same ha_priority of the active, the active remains the clock
|
||||
source. There is no need to switch active when they have equal
|
||||
ha_priority.
|
||||
|
||||
Test plan: two sources with same priority
|
||||
PASS: Verify a clock source is selected active when it starts to match
|
||||
the requirements and the current active doesn't match them, event if
|
||||
they have equal ha_priority.
|
||||
PASS: Verify a clock source isn't selected active when it starts to
|
||||
match the requirements and the current active does too match them.
|
||||
|
||||
Regression: two sources with different priority
|
||||
PASS: Verify a clock source is selected active when it starts to match
|
||||
the requirements and the current active doesn't match them, even if
|
||||
their ha_priority is lower than the actives.
|
||||
PASS: Verify a clock source is selected active when it starts to match
|
||||
the requirements and the current active does too match them but has
|
||||
lower ha_priority configured.
|
||||
PASS: Verify a clock source isn't selected active when it starts to
|
||||
match the requirements and the current active does too match them
|
||||
and has higher ha_priority configured.
|
||||
|
||||
Story: 2010723
|
||||
Task: 48699
|
||||
|
||||
Signed-off-by: Andre Mauricio Zelak <andre.zelak@windriver.com>
|
||||
---
|
||||
phc2sys.c | 10 +++++++++-
|
||||
1 file changed, 9 insertions(+), 1 deletion(-)
|
||||
|
||||
diff --git a/phc2sys.c b/phc2sys.c
|
||||
index 1dd8c0f..5df89e5 100644
|
||||
--- a/phc2sys.c
|
||||
+++ b/phc2sys.c
|
||||
@@ -420,6 +420,13 @@ static bool clock_match_ha_pds_requirements(struct clock *clock, struct config *
|
||||
return true;
|
||||
}
|
||||
|
||||
+static bool clock_match_ha_requirements(struct clock *clock, struct config *cfg)
|
||||
+{
|
||||
+ return clock_match_ha_dds_requirements(clock, cfg) &&
|
||||
+ clock_match_ha_tpds_requirements(clock, cfg) &&
|
||||
+ clock_match_ha_pds_requirements(clock, cfg);
|
||||
+}
|
||||
+
|
||||
/* save a list of available source clocks that matches ha requirements */
|
||||
static int clock_available_ha_src_clocks(struct phc2sys_private *priv, struct config *cfg, clock_list_head_t *available_clocks)
|
||||
{
|
||||
@@ -1183,7 +1190,8 @@ static struct clock* check_and_select_clock(struct phc2sys_private *priv, struct
|
||||
active_clock_class = active->node->dds.clockQuality.clockClass;
|
||||
candidate_clock_class = candidate->node->dds.clockQuality.clockClass;
|
||||
if ((active->ha_priority == candidate->ha_priority) &&
|
||||
- (active_clock_class == candidate_clock_class)) {
|
||||
+ (active_clock_class == candidate_clock_class) &&
|
||||
+ clock_match_ha_requirements(active, cfg)) {
|
||||
return NULL;
|
||||
}
|
||||
|
||||
--
|
||||
2.25.1
|
||||
|
@ -46,4 +46,5 @@
|
||||
0046-Robustness-improvements-to-phc2sys-socket.patch
|
||||
0047-phc2sys-without-w-option.patch
|
||||
0048-HA-domain-number.patch
|
||||
0049-GM-clock-accuracy-and-offset-scaled-log-variance.patch
|
||||
0049-GM-clock-accuracy-and-offset-scaled-log-variance.patch
|
||||
0050-Select-matching-requirements-clock-if-active-doesn-t.patch
|
Loading…
x
Reference in New Issue
Block a user